Looking for #1-1/2 buck or #0 buck load data

[Texas Gun]

Hello I’m looking for data for some buck shot
I have some buck they call #1-1/2 buck and some #0000
Looking for loads that use HS-6 or HS-5 with standard wads

[centershot]

From the Hodgdon website:

Manufacturer
Powder
Primer
Wad
Grs.
Pressure
Vel. (ft/s)
Hodgdon
HS-6
Win. 209
WAA12F114
30.0
8,400 PSI
1,250
Hodgdon
HS-6
Win. 209
WAA12F114
31.0
8,700 PSI
1,300

These are in WW AA hulls, both CF and HS, loaded with 9 pellets of 00. Just substitute the #1-1/2 pellets if you prefer them.

[Texas Gun]

I was looking for more loads like these but using more modern wads and combos.. and ww12F114 are not the same as a WW12 or ww12R

[1Papalote]

I load .311 cast balls in a standard wad using payload data equal to the weight of the 9 round balls.

[centershot]

I load .311 cast balls in a standard wad using payload data equal to the weight of the 9 round balls.

Same here. The advantage of #1 or 1-1/2 is that they don't bulge the hulls when loaded in a plastic wad. Just load equal weight of the #00 recipes. Also, the 1-1/2 can be loaded 2x2 in some wads. Hogtamer has shared these loads that patterned spectacularly well! He attributes his success to the 2x2 pllet stack, saying that the pellets move more freely through the choke. Makes sense to me. One load used #00, the other was #1.

http://castboolits.gunloads.com/show...hot-PERFECTION

http://castboolits.gunloads.com/show...pretty+in+pink