Lee PrecisionMidSouth Shooters SupplyRepackboxTitan Reloading
ADvertise hereRotoMetals2Inline Fabrication

Results 1 to 11 of 11

Thread: I shortened a 50 caliber barrel.....

  1. #1
    Boolit Master
    Join Date
    May 2010
    Location
    Chula Vista, CA
    Posts
    1,067

    I shortened a 50 caliber barrel.....

    I put together a 50 caliber patched round ball Schuetzen type stock rifle for our monthly matches that are shot at 25 and 50 yards with open sights. I bought the barrel, lock and trigger from Pecatonica River to use on a finished stock I got from then 4 or 5 years ago and converted the stock to a bench rest stock to go with the 45 caliber fast twist barrel in use at the time. I didn't talk with them much about the barrel, they said 1 1/16 across flats and 1 in 48 twist. The twist is a tad fast but it was the only barrel they had at the time so it is okay. Found out the barrel is 36 inches long.......whoa that is a hand full to shoot off hand. I tried a couple pf sessions and it is too much for me to hold, even with a palm rest. So I shortened it to 28 inches and that is waaaaaaay better and accuracy is spot on at 25 and 50 yards.

    I inserted three sets of tight cleaning patches just below where the cut would be. I wanted to use my 3 in 1 multi tool but the hole in the lathe shaft was a tad too small so I cut it with my electric hack saw. I used a large fine tooth file to smooth the muzzle then a 90 degree cutter and last of all the 11 degree cutter and did the Q-Tip test, no fuzz left behind!

    Tested the rifle after cutting a new slot for the front blade sight and much easier to hold and shoot and accuracy seems the same. As soo as I can find our home scales I see how much weight I took off.
    John

  2. #2
    Boolit Master
    Join Date
    Jul 2013
    Location
    Florida
    Posts
    718
    Well you now have a short 8 inch piece of barrel to make a matching pistol out of. Glad it worked out and have fun shooting the rifle.

  3. #3
    Boolit Master bedbugbilly's Avatar
    Join Date
    Sep 2013
    Location
    MI (summer) - AZ (winter)
    Posts
    3,910
    Sounds like a fun project and would love to see some photos of it!

  4. #4
    Boolit Master
    Join Date
    May 2010
    Location
    Chula Vista, CA
    Posts
    1,067
    I think I posted a picture with the 45 caliber barrel and also the scope on this stock then took it all apart. Here it is with the 50 caliber barrel before shooting and with open sights to use in our matches. Since I am battling cancer in my left lung now the match director said I could use a palm rest or even sit down if I need to and now with the shorter barrel I can manage it way better.
    JohnClick image for larger version. 

Name:	schuetzen.jpg 
Views:	41 
Size:	91.3 KB 
ID:	268771

  5. #5
    Boolit Master

    Join Date
    Apr 2005
    Location
    Montana
    Posts
    1,563
    A fellow at our local club cut down a CVA from the original twenty-something inches to 18".
    He used a hack saw and crowned it with a rattail file.
    The fact that he could still win a match or two with it doesn't say much for the shooting skill of the rest of us.
    ..

  6. #6
    Boolit Master bedbugbilly's Avatar
    Join Date
    Sep 2013
    Location
    MI (summer) - AZ (winter)
    Posts
    3,910
    John - Thanks for the photo - that's a great looking rifle. The matches have got to be a lot of fun as well. You take care of yourself - our thoughts and prayers are with you!

  7. #7
    Boolit Master Jedman's Avatar
    Join Date
    Nov 2014
    Location
    NW OH Oak Openings Area
    Posts
    735
    I have a under hammer 58 cal. muzzleloader I built about 40 years ago that had a 32” octagon barrel that was 1 1/8” across the flats. It was a bear to shoot off hand but great from a rest.
    I wanted to hunt with it so about 20 years ago I cut it back all the way to 20” and have shot a couple deer with it and it is just as accurate as it was at 32”. I originally had a receiver sight on it but now have it scoped with a compact 4 X and like it a lot.

    Jedman

  8. #8
    Moderator Emeritus / Trusted loob groove dealer

    waksupi's Avatar
    Join Date
    Mar 2005
    Location
    Somers, Montana, a quaint little drinking village,with a severe hunting and fishing problem.
    Posts
    17,971
    I did the same with a rifle a year ago. Cut 8" from the barrel, and reduced the weight quite a bit. I can shoot a heavy rifle better,but this one was just too much.
    The solid soft lead bullet is undoubtably the best and most satisfactory expanding bullet that has ever been designed. It invariably mushrooms perfectly, and never breaks up. With the metal base that is essential for velocities of 2000 f.s. and upwards to protect the naked base, these metal-based soft lead bullets are splendid.
    John Taylor - "African Rifles and Cartridges"

    Forget everything you know about loading jacketed bullets. This is a whole new ball game!


  9. #9
    Boolit Mold
    Join Date
    Oct 2020
    Posts
    18
    I shortened a 32 inch 45 slug rifle side lock to 26 inches. Shot just as accurate. Shot 6 deer with it to 150 yards. Sold it to a Florida shooter who shoot pigs with it. I would run a 400 grain lubed bullet through the cut off piece of barrel to preengrave the bullet. Used 100 grain of powder a fiber wad and then the bullet. At 100 yards from a rest it would keep one hole ragged. Have fun with your rifle.

  10. #10
    Boolit Master
    Join Date
    May 2010
    Location
    Chula Vista, CA
    Posts
    1,067
    Thanks for the replies everyone. I was told by my mentor that 26 to 28 inches shoot well out to several hundred yards. If you are going further then a 32 to 36 inch barrel allows more time for powder burn which equates to a slightly higher velocity. But then you are shooting on a log or a bench.
    John

  11. #11
    Boolit Master Good Cheer's Avatar
    Join Date
    Jul 2010
    Location
    the Ark
    Posts
    3,603
    My shorty.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check