Hi, i have this pistol since 1987 and havenīt shot it for a long time.Planning to do this again soon. I have a TC maxi ball mould and my concern is what would it be the maximum safe load in this pistol with said bullet?
Thanks, regards, Nicioli
Hi, i have this pistol since 1987 and havenīt shot it for a long time.Planning to do this again soon. I have a TC maxi ball mould and my concern is what would it be the maximum safe load in this pistol with said bullet?
Thanks, regards, Nicioli
Patriots were only intended for a patched round ball with a maximum charge of 30 grs of 3fg
Still in all, that ain't SHABBY. A 140 gr. (-ish) ball impelled by 30 grains of FFFg is nothing to sneeze at. I'M not stepping out in front of one!
For in much wisdom is much grief: and he that increaseth knowledge increaseth sorrow. Ecclesiastes 1:18
He that troubleth his own house shall inherit the wind: and the fool become servant to the wise of heart. Proverbs 11:29
...Verily I say unto you, Inasmuch as ye have done it unto one of the least of my brethren, ye have done it unto me. Matthew 25:40
Carpe SCOTCH!
The Patriot pistol manual lists a max. load of 35 grains of 2F powder and it's only recommended to load it with a patched round ball. --->>> http://www.tiropratico.com/manuali-p...Supplement.pdf
Last edited by arcticap; 09-28-2020 at 02:58 AM.
.
Welcome to the board, Nicioli ! !
Now I lay me down to sleep
A gun beside me is what I keep
If I awake, and you're inside
The coroner's van is your next ride
Mine shoots terrible above 20 gr. At 20 gr and down to 15 it's a one hole shooter at 25 yards off a rest. No point trying to load one up hot. I did have a smoothbore 50 cal barrel on it for a time, 50 gr. of powder and 3/4 oz shot cracked the stock. I wouldn't recommend that.
I was shooting against one last year and he was using only 18 grains 3F with a tight patched ball started with a mallet. He was good, clover leaf at 25 yards off hand. Needless to say he shot my pants off. LOL
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |