got a large quantity om mixed 9mm brass. different lengths.what should i trim them to? the shortest? got a Sig,my first 9mm, haven't got dies or mold yet.
got a large quantity om mixed 9mm brass. different lengths.what should i trim them to? the shortest? got a Sig,my first 9mm, haven't got dies or mold yet.
Most manuals recommend .750.
I don't bother to trim mine. Never had an issue with length.
If they act similar to 45ACP brass, they will shorten as they are fired over time.
I just load them all , But I do use a load in the low to mid of the loads in the book
So I am never close to max
Unless I wanted to do Match shooting
I just load the mixed brass all the same OAL
Some have a bit extra of the bullet inside or outside of the case
But they all go bang
LOL I messed up and loaded some 380 ACP with 9 MM powder charge and bullets
I just had REAL long 380 ACP loads
Even these short cased loads shot fine out of my Glock 17
So IMO case length isn't a big deal
John
And I carry a LOADED Hell CatYea, thou I walk through the valley of the shadow of death, I will fear no evil; for thou art with me; Thy rod and thy staff, they comfort me.
I’ve never trimmed 9mm in my life! Just load em
Long, Wide, Deep, and Without Hesitation!
Agree with previous posts, load em and shoot em.
Case trimming is more for rifle cartridges. Never trimmed a handgun case ever.
I taper crimp, and have yet to trim any 9mm or .45ACP.
I haven't had a problem so far.
In school: We learn lessons, and are given tests.
In life: We are given tests, and learn lessons.
OK People. Enough of this idle chit-chat.
This ain't your Grandma's sewing circle.
EVERYONE!
Back to your oars. The Captain wants to waterski.
I taper crimp, and have never needed to trim any 9mm, .40 S&W or .45ACP.
thanks, that will save me a lot of work!
Never heard of 9mm extending. Just load them up and forget the trimming.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |