I have a compass utility and have been watching a videos on ways to adjust the trigger. Some state their method will not pass the drop test. I was wondering what some others experience has been.
Thanks
RRH
I have a compass utility and have been watching a videos on ways to adjust the trigger. Some state their method will not pass the drop test. I was wondering what some others experience has been.
Thanks
RRH
I am pretty sure its a one has normal trigger. I think the two has a trigger like the savage acutrigger.
Last edited by redriverhunter; 09-25-2020 at 08:42 AM.
My compass came out of the box with a 4.5 lb trigger which is perfect for a hunting rifle, mine is a 308(1/12 twist). It does this at 100 yards with a 3-9 vortex scope
Attachment 269876
I removed one of the adjustment nuts on mine, and it wouldn’t pass the drop test. I installed a small washer in place of the nut that I removed, and it resulted in a nice light trigger that passes the drop test just fine. FYI, the spring from a Winchester Model 70 will work in place of the T/C trigger spring, and give you a lighter pull. They are available in several weights, as well.
"Experience is a series of non-fatal mistakes"
Disarming is a mistake free people only get to make once...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |