Looks like I may get it this week:
Looks like I may get it this week:
Mold arrived a day early.
Mold with the insert in place for the hollow base:
View of the cavity:
Not pretty because I cast them quickly from a cold mold. 107gr (around 1/4 oz) and .410" dia at head and skirt.
Looks awesome Andy!!!
I sent ya a PM
CW
NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
Come visit my RUMBLE & uTube page's !!
https://www.RUMBLE.com/user/Cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
Answered.
Brass cases arrived and they fit:
Now just waiting on the wads and we should be up and running with experimentation.
Last edited by AndyC; 11-16-2020 at 06:09 PM.
Wads finally arrived today - a replacement from MidwayUSA, as the location of my original shipment is in dispute between UPS and USPS.
I have to admit I have no idea what powder-charge I'll use - I have H110 and L'il Gun.
Greetings, yet another good post on .410 slug load, I'm enjoying it.
Thank you for sharing it.
I give you * * * Star, Good ratings.
The Star rating is screwed up therefore I cant use it, any one giving one star for this post is like back stabbing his sincere, hard work and efforts, please fix the ratings on the forum ! !
* * * * * Star Excellent with documemtation and pictures
* * * * Very Good
* * * Good post and helpful
* * Average but OK
* Nothing to brag about
Best regards,
Ajay K. Madan
Super Blazing Sabots
Last edited by SuperBlazingSabots; 11-28-2020 at 02:06 PM.
I finally had a little time, so I'm developing the initial .410-bore slug loads and going slowly.
Each additional 0.5 grains of powder raises the slug inside the case quite visibly:
The setup inside - powder, over-powder card, 3x 1/4" cushion wads, slug, overshot (or overslug, in this case) card - sealed with hot glue:
Greetings AndyC, great pictures to back up your post and for us to visualize things far better. I would only change for plastic OP wad for far better obturation and therefore even reduce the powder charge by .5 to 1 gr after using that.
Thanks for sharing it.
Best regards,
Ajay K. Madan
Super Blazing Sabots
Looks good! For size comparison I'd really like to see one of your .410 Lyman Slugs next to a 12 ga Lyman Slug?
Randy
"It's not how well you do what you know how to do,,,It's how well you do what you DON'T know how to do!"
www.buchananprecisionmachine.com
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |