looking for a .359, round nose, 115 gr, no lube ring, 4-6 cavity mold...is there an easy way to search or does anyone want to sell?
should add in stock
looking for a .359, round nose, 115 gr, no lube ring, 4-6 cavity mold...is there an easy way to search or does anyone want to sell?
should add in stock
Do you have a specific reason for no loob groove? You can PC any boolit
i do not have any reason except i loaded 500 store bought and liked them (easy to reload and shot great) and want to make my own.
also from what i have been reading dont want LEE
Check Accurate Molds, they offer to build custom molds and are to quality.
noe does them, so does mihec, you might just have to bite the bullet as it were and order a new mold. for what its worth, lee makes perfectly usable molds, they are what I started with and sometimes still use, but I got to admit the mehic molds are a dream.
if you are ever being chased by a taxidermist, don't play dead
worse case scenario, bring some lead out and you can cast some here.
if you are ever being chased by a taxidermist, don't play dead
Check the NOE web site ... www.noebulletmolds.com
Look at mould # HTC 354-115- RN-V6 . This is a powder coat design , HTC coating recommended , no lube groove and sized so the thickness of the powder coating is taken into consideration .
A boolit that is .358" and then powder coated will be too large for 9mm .
They appear to have some moulds " In Stock" ... you might want to check them out .
Nice moulds and nice people to do business with , they are in the USA .
Just checked ... 4 cavity aluminum moulds ... 6 are in stock now !
Gary
Last edited by gwpercle; 09-18-2020 at 07:32 PM.
Certified Cajun
Proud Member of The Basket of Deplorables
" Let's Go Brandon !"
I saw that but my 9 slugs at .357 from the advise i have received here....after PC the NOE will be on the small side
you will be fine with a mold that casts .357 or more pc will add 1-2 thousandths then size to .358 shoot and enjoy.
I do the MP at 357 and they work great after powder coating yes mine are 125 not sure of 115 also Arsenal will cut to dimensions you want and may even cut a lighter weight mold if you ask .
MP has this mold.
https://www.mp-molds.com/product/356...o-lube-groove/ Casts at .359, but it's out of stock.
I have this mold.
https://www.mp-molds.com/product/357...e-groove-mold/
It's my go to 9mm mold. It makes beautiful boolits. It drops boolits like a cow pissing on a flat rock.
NRA Benefactor.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |