So I am going to buy a barrel in 375 Raptor and I’m at a dilemma . I can buy a pre-made barrel with a 1 in 8” twist . The advantage is I can have the barrel in my hot little hands by this weekend . I primarily want to shoot the Mihec 270 grain gaschecked boolit between 2000-2200 FPS after powder coating them . I also have 1000 , 225 grain Hornady PSP jacketed Bullets that will be loaded around 2600-2750 FPS . Is this 1 in 8” too fast for what I want to do ? Will the fast twist cause my cast boolits to skip or strip out , or would it be too fast for the light 225 grain Bullets from HDY ? I would prefer a 1-10 or 1-12 twist but I would have to wait for that to be made which would most likely be sometime in December before I receive it . Please let me know what you guys think about twist rates and cast boolits . Dilemmas dilemmas oh what do I do ? Thanks guys for any an all info to edjimicate this poor old country boy .