Want To Buy Dillon 1050 Conversion Kits

[hotrod13]

I'm looking for the following Dillon 1050 conversion Kits:


40 SW
45 ACP


Maybe a few other calibers, let me know what you have, interested in just parts (shell plates, funnels, etc.)

Just pm me your asking price and what caliber(S) you have, and I will get back to you quickly
If local (Oklahoma City), I have small pistol or rifle primers I can trade.

Thanks

[4719dave]

I think I have a 45 acp kit nib and a used tool head I could sell / sm pistol primers ��

[deltaenterprizes]

9mm shell plate is used for 40S&W

[hotrod13]

thanks, then I will remove the 40. You have a extra shell plate that is the only thing I need for the 9.

[cat-mechanic]

9mm shell plate is used for 40S&W

No it is not! That is only on the 550, 650 or 750 platform. The 1050 uses a W shell plate for 40 and a #5 for 9mm. As well as the case feed plunger, 9 takes a Small and 40 takes a medium.

[too many things]

cat is right dillon dont make stuff to change easy

[deltaenterprizes]

No it is not! That is only on the 550, 650 or 750 platform. The 1050 uses a W shell plate for 40 and a #5 for 9mm. As well as the case feed plunger, 9 takes a Small and 40 takes a medium.

My #5 works with 9mm or 40 S&W, they are at least 30 years old and when I bought my presses that is what was sold to me! I loaded ammo for my Sherriff’s Department training and had one press just for 9mm and 40 S&W, I just swapped tool heads and maybe the case feed plunger and locating pins. It has been over 30 years ago.
I went and checked my #5 and a 40 S&W case fits.

[harm]

I have a 9mm kit I could spare. Will PM and hopefully send a picture if I figure that out.

[harm]

Somebody let me know if this is complete or not. I don't want to be short anything..

https://m.imgur.com/a/89XKoW5.jpg

[hotrod13]

Thanks harm, still looking for more

[cat-mechanic]

My #5 works with 9mm or 40 S&W, they are at least 30 years old and when I bought my presses that is what was sold to me! I loaded ammo for my Sherriff’s Department training and had one press just for 9mm and 40 S&W, I just swapped tool heads and maybe the case feed plunger and locating pins. It has been over 30 years ago.
I went and checked my #5 and a 40 S&W case fits.

My apologies Delta, I just got home from working out of town and checked. Yes a 40 will fit in a 9mm plate, Just seems slightly off and sticks out a hair. So evidently it would work.

[hotrod13]

Thanks and bump