I have a Saeco 315 which is their benchrest bullet. What I am having problems loading a loaded cartridge into my model 70 match rifle. I've heard of bullet nose diameter reducing dies. I have to mention that the rifling in the throat is almost new and I'd be suprised
if the rifle actually had enough rounds down the barrel to even slightly allow this particular bullet to pass into the throat. I have to fight with the bolt to get a loaded round to fully seat in the chamber. Ball park reduction would be on the order of .003-.004 and only part of the nose needs to be resized. So my question is are these dies made commercially or special order. Thanks for any assistance. Frank