What is the thread of the little allen head set screw that holds the top punch in? Missing one and need to make a trip to the hardware store.
|
   
   
|
|
What is the thread of the little allen head set screw that holds the top punch in? Missing one and need to make a trip to the hardware store.
I just put a dab of lube on the top of the top punch shoulder. That holds it in place and allows the top punch to self align with the boolit if necessary.
Some times it's the pot,
Some times it's the pan,
It might even be the skillet,
But, most of the time, it's the cook.
While I'm not 100% positive, a 10-24 "fits" but is the wrong thread pitch. So whatever the fine thread is, I believe 10-32. I counted 9 threads in a quarter inch on the thread of the screw in mine, which works out to 32 tpi.
Sent from my SM-G975U using Tapatalk
Thanks, I'll see if I can find one tomorrow.
look for a 10-32
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote