RotoMetals2ADvertise hereRepackboxTitan Reloading
Lee PrecisionInline FabricationMidSouth Shooters Supply

Results 1 to 9 of 9

Thread: MP 7mm Silhouette- Interest?

  1. #1
    Boolit Buddy KVO's Avatar
    Join Date
    May 2017
    Location
    Round Rock, TX
    Posts
    282

    MP 7mm Silhouette- Interest?

    Mihec has absolutely zero 7mm designs available. Any interest in a new 7mm design based on a scaled down 311-180 Silhouette? This bullet has given me good accuracy in a variety of guns and the tapered nose fits many different throat configurations well. Also works well lubed or PC. Most of the available semi-custom 7mm designs are either WFN or the odd Loverin, or bore riders that are problematic with PC. Accurate Molds will not cut a GC 7mm. I'm envisioning something that weighs in between 155-165gr and would fit in a 7mm-08. Any interest?

  2. #2
    Boolit Buddy nhyrum's Avatar
    Join Date
    Jan 2017
    Posts
    239
    I think that bullet would be a great one. With no 7mm's out there, I think there's a lot of different applications this bullet could have. It's too bad I don't have a 7mm. But I think, and hope, this will take off.

    Sent from my SM-G975U using Tapatalk

  3. #3
    Boolit Master



    MUSTANG's Avatar
    Join Date
    Jan 2012
    Location
    Moapa, Nevada or Kalispell, Montana
    Posts
    1,420
    I would be interested in one of these in 7mm.
    Mustang

    "In the beginning... the patriot is a scarce man, and brave and hated and scorned. When his cause succeeds, the timid join him, for then it costs nothing to be a patriot." - Mark Twain.

  4. #4
    Boolit Buddy Gamsek's Avatar
    Join Date
    Jul 2015
    Location
    EU
    Posts
    370

    MP 7mm Silhouette- Interest?

    Bobby Kell Jr (aka Boolitdesigner / 45 2.1 ) already got throat dimensions from few modern 7mm rifles so he can design the best possible. Following his directions I made 3 samples from Heym 7x57R, Blaser R95 7x64 and from 7mm Rem.Mag Steyr Manlicher Luxus. Samples were delivered to Miha and he sent them to Boolitdesigner, he just told me he is working on design.

    Since I own 4 rifles in various 7mm (also Ferlach Bock-driling in 7x65R/16/22WMR I have special interest in this 7mm bullet to be machined fast.

    I think Miha should make a Hunting version for 7mm with FP and HP (150-160grs) and also 7 Sil version with smaller HP (160-170grs...). But this only what I think, cannot see in Miha’s and Bobby’s thoughts.

    I have 5 of his HP/FP moulds in 311”-312”, but I really need a nice 7mm too.

    Last edited by Gamsek; 08-09-2020 at 04:00 PM.

  5. #5
    Boolit Buddy KVO's Avatar
    Join Date
    May 2017
    Location
    Round Rock, TX
    Posts
    282
    Wow, I'm surprised how fast this is picking up steam! Like Gamsek I'd be for a heavier 7 Sil and and a HP option would be great. I have the NOE 150 Hunter and it looks great but could never get it to shoot to my satisfaction. I would think 7mm will be a more easily organized run with less custom diameter requests as most guns (outside of 7x57 Remington Rolling Blocks) should have fairly consistent 0.284-0.285" groove dimensions.

    If samples and throat dimensions are being spec'd, we may need a honcho soon?

  6. #6
    Boolit Buddy Gamsek's Avatar
    Join Date
    Jul 2015
    Location
    EU
    Posts
    370
    Quote Originally Posted by KVO View Post
    Wow, I'm surprised how fast this is picking up steam! Like Gamsek I'd be for a heavier 7 Sil and and a HP option would be great. I have the NOE 150 Hunter and it looks great but could never get it to shoot to my satisfaction. I would think 7mm will be a more easily organized run with less custom diameter requests as most guns (outside of 7x57 Remington Rolling Blocks) should have fairly consistent 0.284-0.285" groove dimensions.

    If samples and throat dimensions are being spec'd, we may need a honcho soon?
    As soon as Miha gets design we can start rolling. We don’t know yet how it will look and what weight.

    I know Miha has interest to make other rifle calibers since he resolved problems with cherries for longer skinnier bullets.

    After I hear from Boolitdesigner I will talk to Miha to find a honcho and start rolling.

  7. #7
    Boolit Buddy zymguy's Avatar
    Join Date
    Feb 2017
    Location
    Ely MN. (bwcaw)
    Posts
    497
    I would be in for a 7 mm


    Sent from my iPhone using Tapatalk

  8. #8
    Boolit Mold
    Join Date
    Sep 2008
    Location
    Missouri
    Posts
    23
    What he said "I'm envisioning something that weighs in between 155-165gr and would fit in a 7mm-08." count me in.

  9. #9
    Boolit Buddy


    Join Date
    Sep 2009
    Location
    The Lowcountry
    Posts
    492
    I'd be interested in one for my 7mm BR!

    I just started working up some cast with a Noe mold, I got from Dimner, something a little heavier, hollow pointed and gas checked. The Noe mold is aluminum, and throws 134 grain, flat nose boolit, so far it is shooting better than I can hold it!

    Can't have to many molds!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check