.500 Linebaugh molds/dies question

[Targa]

Hi all, I will be buying a BFR in the near future and would like to know what die set and boolit mold you are using? I am looking at Hornady dies for my Lee turret press and 525 grain molds from Accurate. Also are you all resizing after casting?

I really thought about just getting a .475 Linebaugh since it would be a bit easier for reloading and casting equipment simply because I could stick with Lee for the dies, molds and resizer, but I pretty well have the big bore 40’s covered with .44mag, .454Casull and would really like for my last big bore to be a .50 cal. Thanks for any help.

[smithnframe]

I'd stay away from Hornady dies! Check RCBS for dies and moulds.

[white eagle]

I have dies from Mp Molds and from Mountain Molds both excellent
I have Hornady dies as well no problems

[Targa]

Sounds good, thank you

[reloader28]

I like my Hornady dies. I have the Accurate 51 450C
Drops out at 455gr and .514 and I shoot them pan lubed them unsized.

[Targa]

Thank you for the input, I appreciate it.

[DHDeal]

I'd stay away from Hornady dies! Check RCBS for dies and moulds.

Were you being specific about 500 Linebaugh and Hornady dies?

[Targa]

My plan is pretty similar to what reloader28 is using and pan lubing with White Label Carnauba Blue. I am also thinking that I might go with brass for this mold.