Has anybody adapted a Hornady 22 bullet feeder and die to a 1050? I've found numerous examples of mounting on a 650 but none for a 1050.
Has anybody adapted a Hornady 22 bullet feeder and die to a 1050? I've found numerous examples of mounting on a 650 but none for a 1050.
"EXPERT= Ex is a has been, spurt is a drip under pressure" Unknown
I have, set it the same as you would on any other press. I made a plastic adapter that fit on top of the die and would accept the spring like the one the KISS/MBF dies use for the 1050.
Was that on 1050 or the super? I tried installing it on my 1050 for 223 and don't have enough room for the die to operate correctly. Maybe I will try again. Thanx
"EXPERT= Ex is a has been, spurt is a drip under pressure" Unknown
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |