Found this in the bottom of a box of parts I picked up. Looks like PVC pipe with lead base, 3 1/8" tall x 1 5/8" OD x 1 3/8" ID. Not familiar with it, anyone know what it is?
Attachment 264518
Attachment 264519
Attachment 264520
Found this in the bottom of a box of parts I picked up. Looks like PVC pipe with lead base, 3 1/8" tall x 1 5/8" OD x 1 3/8" ID. Not familiar with it, anyone know what it is?
Attachment 264518
Attachment 264519
Attachment 264520
Looks like a powder trickler body.
It is a powder trickler from the mid 80's I still use mine
Never under estimate the power of stupid people in large in large numbers!!!
"Hope" is not a viable plan and voting for undefined "change" is nothing short of certifiable insanity.
Yup, agree with Pressman and Rusty. It’s just missing the crank spout. Maybe it rolled under the bottom flap of your box?
TEAM HOLLYWOOD
NRA- LIFE TSRA-LIFE SASS-LIFE
Cut a piece of copper tubing that fits the hole about 6 to 7 inches long. Find a couple of o rings that fit the tube tightly to lock the tube in place. Cut a piece of wood dowel and drill a hole in it on one end to make a handle for the tube. Drill a hole into one side of the tube that is half way between the sidewalls of the interior of the body of the trickler. You now have a very good powder trickler for your reloading needs. I have made them out of PVC pipe. Anything that has a tube is a candidate for home made powder tricklers. They work just as well as the factory made ones. james
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |