Titan ReloadingRepackboxWidenersRotoMetals2
MidSouth Shooters SupplyADvertise hereInline FabricationLee Precision

Donate Now Goal amount for this year: 6000 USD, Received: 3655 USD (61%)
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206
****Due to overwhelming e-mails, I will be very slow in updating this list. Please bear with me!****


Page 2 of 2 FirstFirst 12
Results 21 to 25 of 25

Thread: Pitted Chamber fix

  1. #21
    Boolit Master
    Join Date
    Nov 2017
    Location
    brisbane ,qld,australia
    Posts
    1,136
    Yes ,I would try electroless nickle plating .....but the chemicals are expensive ,and the solutions dont last like electroplating solutions .....so unless you have a lot of nickle to do ,not economical ........Mention of hardchrome ....indeed a solution to the problem ,but the chrome deposit is intensely hard ,and sizing the chamber would be a very tedious job of internal grinding with a tiny wheel.....Diamond or CBN ,I d say.......Consequently ,sleeve the chamber with a bit of any HT steel you have .....an old gun may even have a soft iron barrel ,so any steel would be suitable ......Id have the lot done in one hour,ready to try out........There is no need of a reamer for these large cases ,just a small boring bar is good.

  2. #22
    Boolit Master
    am44mag's Avatar
    Join Date
    Jun 2017
    Location
    NE Texas/SE Oklahoma
    Posts
    698
    Do you guys know of a good gunsmith that would sleeve the chamber for a fair price? There are no professional gunsmiths around here, so I will most likely have to ship the gun.

    About how much would that kind of work cost?

    Sent from my SM-G965U using Tapatalk
    ______________________________________________
    Aaron

  3. #23
    Boolit Master
    Join Date
    Apr 2005
    Location
    Emory,TX
    Posts
    839

  4. #24
    Boolit Grand Master
    Join Date
    Aug 2005
    Location
    South Jersey
    Posts
    5,589
    Buy a Volks Wagon cylinder honing tool with 1-1/2" to 3-1/8" brushes ... https://www.amazon.com/Lisle-10000-B...V1HASK4ZR&th=1
    I use the 2 brush tool to hone cylinders
    Regards
    John

  5. #25
    Boolit Man Ajohns's Avatar
    Join Date
    Mar 2019
    Location
    Roseau, Mn
    Posts
    88
    Size a case, and put mold release on it. Or if nothing else, wax. Put a little dab of JB in the spot if you can get to it, and carefully put your case in the chamber. Let cure and extract the case. The JB should fill nice, and if mixed properly it should stand up to your pressures. I have done this before, but it was on a 32 rimfire chamber. Still stands to this day.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check