Problems with powder adhesion.

[remy3424]

That seems counter-productive. I would be surprised if the PC sticks well. When spraying autmotive paint, any trace of silicone will result in fish-eyes" in the finish (just what tomme says). I would personally not want that around....it is interesting the PC stuck at all....maybe the heat does something to it??? Silicone matts seems to take heat well, so I don't think that is it. Paint (latex, in the home)won't stick to silicone caulk. Wonder if anyone tried this and shot them.

I also don't shake, it just breaks my containers, #5s seem to be brittle. Swirl for 30 seconds or so....won't PC with humidity over 50%, I just wait for a drier day. On Amazon you can get little digital meters, I got a 4-pak for under $10 I believe. I use Smoke's PC, he double bags it and I keep those bags in another large sealed freezer zip-lock bag. As they say, "keep your powder dry", that apply here too! Good luck, keep trying!

[36Power]

...plate your boolits in copper first, then just dip it PC will pretty much jump out of the container to stick to it. No BB's, shaking, acetone, heat, static gun, #5 plastic, or voodoo magic needed

This is actually a true, if not fairly useless, story

[Onebad06vtx]

I run a dehumidifier in my shop.
I keep humidity under 40% at all times and never have had a problem.
Before I started using a dehumidifier,i had problems with the powder sticking on,to much humidity.