Herter's Have Tomorrows Products Today

[Pressman]

Herter’s Rifleman press is superior for reloading 30-06 match ammunition. Cases are prepped using the GLH primer pocket brush followed with trimming on the Herter’s case trimmer then case mouth deburring with the GLH deburring tool. Powder is Measured with the Model 41 powder measure and weights checked with the Model 1 scale and Herter’s powder trickler. Case necks are sized with Herter’s Universal Neck Sizing die and the Herter’s 168 grain Boat Tail Match bullets will be seated with Herter’s MkIII Micrometer Seating die.

[Hamish]

I can't almost smell the old man's Aqua-Velva,,,,,

[Gewehr-Guy]

All thats missing is a box of Model Perfect Premium Brass, I'll see if I have a box of 30-06.

[jdfoxinc]

Anybody have Brill cream?

[PHyrbird]

Now this is cool, go for a 308 swage die to make your own jacketed pills. I note the tall die in the press. Those work on 7.62 Tok too. Imagine one die to neck size most .308 calibers, neck expand, then change an insert to seat. As I said cool.

[M-Tecs]

Your loads are not complete unless topped by some Herter's Wasp Waist Sonic Missile Tail bullets........................

[smithnframe]

That's one helluva seating die!

[kootne]

For the very best results make sure you use the "Herter's Number 1 Premium Mark 10 Guide Model Perfect".