About a year and a half ago a fellow cartridge collector asked if i was able to help him with a project.. It was reproducing the original 70-150 Winchester as shown on an early Winchester cartridge Board from 1887. With the help Of Dave and Denny of CH4D, we were able to acquire a set of Loading dies and Form dies to make this massive Case. It is Built on a Magtech 12 Gage Brass case , necked and shouldered , Trimmed. to Winchester Spec . This are not Loaded with the 150 Gr. Of Black Powder as Required But is the same equivalent weight Of media filler. The primers are also Deactivated. Basically a Display Round for our annual meeting. Case length is 2.18"
Well here is the result
Thanks For Looking
Sal
AmmunitionArtifacts