Inline FabricationTitan ReloadingWidenersLee Precision
Reloading EverythingMidSouth Shooters SupplyLoad DataRepackbox
RotoMetals2
Results 1 to 2 of 2

Thread: Reamer drawing for 40-82 Silhouette or Crosno

  1. #1
    Boolit Mold Rifledude's Avatar
    Join Date
    Jan 2022
    Posts
    12

    Reamer drawing for 40-82 Silhouette or Crosno

    Anyone out there in possession of a reamer drawing from Dave Manson for a 40-82 Silhouette? I am going to have a rifle re-barreled and am trying to get a set of dies made as well. One of the requisites is a chamber drawing. I've looked online, but no joy. Thought there might be one out here in this forum. If so and you will email it to me I would be forever in your debt! Email to rifledude@msn.com and thanks in advance.

  2. #2
    Boolit Master Moleman-'s Avatar
    Join Date
    Jul 2016
    Location
    SW Michigan next to a corn field
    Posts
    1,291
    Dave will make you a chamber reamer and a die reamer. Makes a custom sizer about as easy as threading and chambering the barrel blank. I usually make straightwalled wildcat sizers by boring a die blank (threaded barrel blank drop) to whatever is close to the neck area of the same caliber sizer die for another cartridge. Then add in any taper ending where the bullet base would be on the cartridge. This one however I made with a Manson sizer die reamer.
    Last edited by Moleman-; 01-11-2022 at 04:11 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check