My son has a 1944 Mosin Nagant and a Chinese 53. I would like to know what the rate of twist is in them and what weight bullets we should use? Thanks - Jerry
My son has a 1944 Mosin Nagant and a Chinese 53. I would like to know what the rate of twist is in them and what weight bullets we should use? Thanks - Jerry
1:10, 150 to 200 with 170 to 180 typically best. Slug the barrel of course for best size to use. If you cast/load 303, your a leg up probably.
My Mosin loves the tula ammo for some reason. It's a tack driver with it. PPU and hand loads i get a 5 inch spread.
One round at a time.
Member of the NRA,GOA and FAOC. Gun clubs Zerby rod and gun club. Keystone Fish and Game Association.
I'm not saying you should use this weight but my Mosins also shot very well with 220 grain cast projectiles and the action is long enough to accommodate a bullet that long seated with the base at about the base of the neck. Everything from 135 grs to 220 grains did well for me in multiple rifles.
Rule 303
Thanks for the help.
I have both a M 44 and M53 also.
They both like 170 or 180 grain best.
Now that is in cast sized to their respective bore diameter.
They both shoot very good with 150 gr Jacketed
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |