Picked this up in a junk store on Hwy 2 in Idaho a couple years back. Thinking it must be solder. Anyone know?
Paid $5 for it so if it's 60/40 I got a good deal.
Picked this up in a junk store on Hwy 2 in Idaho a couple years back. Thinking it must be solder. Anyone know?
Paid $5 for it so if it's 60/40 I got a good deal.
Last edited by Cosmic_Charlie; 04-30-2020 at 02:18 PM.
if your going to ask something like that, you really need to post a photo of the object.
if you are ever being chased by a taxidermist, don't play dead
Babbitt
http://www.uamet.com/p6.htm
and
http://www.uamet.com/p4.htm
and
http://www.uamet.com/abc.htm
The original formula for his bearing metal was 89.3% tin, 7.1% antimony and 3.6% copper. This formula is still used by some manufacturers today and marketed as 'Genuine Babbitt', or ASTM B-23 Grade 2 Babbitt. It is a soft, white non-ferrous alloy which is used to provide a bearing surface.
Last edited by skeettx; 04-30-2020 at 02:45 PM.
NRA Benefactor 2004 USAF RET 1971-95
So many photos show how the bar is marked, or whatever the impression of the mold leaves on the surface. What does the open surface of the ingot look like? Raised ridges can show high tin content and is common on Lino ingots. Sunken cavities can also suggest a clue as to the origin of the ingot. But most important can be the fractured area of the ingot. Does it show a fine powder like appearance with a lot of tiny specs reflecting like refined antimony in lino type. Does an oblique light across the surface show a sort of grain structure that forms as the ingot cools. You posted the name, you showed the script on the ingot, but so many more clues are missing. Weight ? Measurement ?????
And now, with a piece laying on a padded surface, tap it smartly with a hammer and listen for that clang sound of striking cast iron. Pretty sure that is linotype. Hint of the grain appearance but mostly lost in the reflective glare. A better view of the fractured area would have been more help than the side of the casting, but it is what it is. It is NOT solder.
If it's Babbitt it would be a darn shame to make cast boolits out of it. There are a number of folks who could use it in refurbishing old machine tools. Possibly including me. I've got a 1941 South Bend Heavy 10L toolroom lathe that I'm in process of restoring, and IIRC, it uses Babbitt in several places. I'll trade you two for one good casting lead for the Babbitt. Seems to me I have range lead, wheel weight, and possibly some linotype metal. I'll pay for postage both ways, too.
I suppose I could take it to the scrap yard and have it tested. If it's genuine Babbitt the tin in it makes it quite useful for alloying with pure. And making Babbitt does not look much harder than making Lyman #2.
Last edited by Cosmic_Charlie; 04-30-2020 at 04:29 PM.
Call United American Metal at
1-312-733-6700
I just spoke with them and they are
open for business
Mike
NRA Benefactor 2004 USAF RET 1971-95
Well, it does have a ring to it. I will go with Dusty's hunch that it is linotype. I will make 1 Lb. ingots out of it.
Scrounge I just sent you a PM.
Most of the tanks are gone and the windows don't rattle anymore. I won't be able to sleep now.
Scrounge I also sent you a private message.
never saw a linotype bar that looked like that. Either solder (my first guess) or Babbitt.
Lloyd, I agree that this does not look like the usual linotype bar that weighs about 22 pounds. But I have on my desk a two part ingot marked Federated Metals Division American Smelting and Refining co. Castomatic linotype. It weighs 5 pounds. I certainly could be wrong, but the visual on the photos suggests Lino. Still no idea what the weight of those pieces total.
They made linotype sweetening bars that were used to sweeten up old linotype. That might be one of them.
I melted the bar down today into 1 lb. ingots. I would say it's heavy in tin. The early melt around the still solid bits was 430 F. The ingots were quite shiny and once cooled, had a ring when tossed across the concrete floor. I'm in no hurry to incorporate it into an alloy so for now it will just sit.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |