MidSouth Shooters SupplyRotoMetals2PBcastcoInline Fabrication
Lee PrecisionTitan ReloadingReloading EverythingWideners
Repackbox Load Data
Results 1 to 8 of 8

Thread: WTB/wtt: looking for 50-110 brass and bullets

  1. #1
    Boolit Buddy
    Join Date
    Jan 2009
    Location
    WOMELSDORF, PA
    Posts
    307

    WTB/wtt: looking for 50-110 brass and bullets

    Hello all. I am looking for 50-110 brass and a couple different cast bullets of 512.513 diameter in the 480 to 525 grain range for a old project that is nearing completion. I have pure lead, coww, and pictures of dead Presidents. Let me know whatcha got. Thanks. Tom

  2. #2
    Boolit Master

    Join Date
    Mar 2011
    Location
    oklahoma
    Posts
    2,473
    What in particular are you looking for in the bullets. I have some MP 512 molds. one is gas checked and drops about 470. The other is plain base and drops about 525. If you are looking for as cast, or powder coated, I could probably help you out. No 50-110 brass though.

  3. #3
    Boolit Buddy
    Join Date
    May 2012
    Location
    West central Illinois
    Posts
    338
    I have 6 pcs of new brass, and some 540 grain RCBS bullets and can size to .512.

  4. #4
    Banned

    Join Date
    May 2012
    Location
    South Texas
    Posts
    1,419
    I'm looking for 348 winchester brass and 8x56r in trade.

  5. #5
    Boolit Man
    Join Date
    Apr 2005
    Location
    AZ
    Posts
    84
    I cast a 630 gr.and a 300gr both gas checked if you want something that heavy or light.

  6. #6
    Boolit Buddy
    Join Date
    Jan 2009
    Location
    WOMELSDORF, PA
    Posts
    307
    The rifle is about a month from being completed. I would like to try several different boolits in it to see what works and what doesn’t. BK7 what would you want for 20 of each, sized 512?
    Hi wall I am interested in your brass and some bullets. Smith I do have some 348 brass.
    I will pm each of you. Thanks

  7. #7
    Boolit Master

    Join Date
    Mar 2011
    Location
    oklahoma
    Posts
    2,473
    fordwannabe. Postage would be sufficient if it runs up to flat rate cost. Guess it might, at about 14 bullets per pound. PM me your address and I'll hook you up. You can send me a check based upon package postage when you receive it.

  8. #8
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,217
    BK7saum - Sorry to walk on this thread, but your inbox is full and wont accept new messages from me (regarding ingot molds) till you clean some of them up.

    Quote Originally Posted by BK7saum View Post
    fordwannabe. Postage would be sufficient if it runs up to flat rate cost. Guess it might, at about 14 bullets per pound. PM me your address and I'll hook you up. You can send me a check based upon package postage when you receive it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check