Inline FabricationLee PrecisionMidSouth Shooters SupplyTitan Reloading
Reloading EverythingWidenersRotoMetals2Load Data
Repackbox
Results 1 to 3 of 3

Thread: .458 Price and options

  1. #1
    Vendor Sponsor


    BT Sniper's Avatar
    Join Date
    Jan 2009
    Location
    Oregon next to the river
    Posts
    5,650

    .458 Price and options

    Here is a cost break down of both what I deem necessary and what additional upgrades I have to offer to make .458 bullets from various jacket materials using my BTSniper premium dies.





    All my pistol and large bore caliber dies start off with the same three basic dies, a point form die, core seat die and core swage die. These three dies when paired with available commercial jackets will make perfect JHP bullets of any weight the user wishes.

    BTSniper Premium swage dies



    $549.00 Point form die
    $549.00 Core bleed die
    $399.00 Core seat die

    *Core swage/bleed die may not me necessary if one is happy to use commercial boolits cast from commonly available molds. Slight fluctuations in final bullet weight may be a result from cores or various weight pieces of brass but accuracy differences will most likely not be noticed. When making .458 cal bullets 44 cal cast boolits work well for cores.


    Base Punches



    Shell holder style base punches for using any decent reloading press

    $89.00 ea. one base punch needed per die





    Threaded base punches for BTSniper improved Lee Classic Cast press

    $69.00 ea. one per die is required



    Auto Eject Systems

    A great addition to speed production rates and reduce fatigue is to add an auto eject to your press.

    Press with 1" ram





    $225.00





    Lee Classic Cast press



    $225.00

    Auto Eject for customer that already has the Lee Classic cast press
    *looking closely it is a shell holder ram top pictured, the threaded ram top that uses my 1/2-20tpi base punches is shown in pic below. Shows that both my threaded base punches and shell holder style base punches can be used if necessary, threaded is standard, shell holder style is more expensive option.




    Swage Press with Auto Eject

    I offer an improved version of the Lee Classic Cast press that I have modified specifically to handle the pressures of swaging. This press has modified linkages that produce over twice the leverage of the stock press and comes with a new threaded ram and auto eject set up. For making these big .458s this press will have a much needed leverage advantage over traditional reloading presses.



    BTSniper improved Lee Classic Swage press with auto eject

    $399.00




    BTX Multi Caliber Notch Die



    makes perfect XTP style bullets

    $249.00






    Draw die to reduce 45 ACP brass for .458 bullets
    additional base punch required

    $225.00





    These are the options and available tooling required to form .458 cal bullets from 45ACP brass or commercial jackets.

    Feel free to contact me for additional details. Let me know your email address and I'll be happy to send copy of instruction manuals for potential customers to look over.

    For order instructions or any questions feel free to contact me.

    Brian Thurner
    PO BOX 1783
    Hood River, OR.
    97031

    BT_Sniper@hotmail.com

    BTSNIPER llc.
    541-436-4095[/B]

    Good shooting and swage on!

    Brian
    Last edited by BT Sniper; 09-20-2021 at 03:30 PM.
    BTX Star Crimp Die
    Back in stock with new low price!
    Click link below!
    http://castboolits.gunloads.com/show...Star-Crimp-Die


    also check in and say hello on my new face book page!
    https://www.facebook.com/BTSniper-153949954674572/

  2. #2
    Vendor Sponsor


    BT Sniper's Avatar
    Join Date
    Jan 2009
    Location
    Oregon next to the river
    Posts
    5,650
    Post saved for additional details
    BTX Star Crimp Die
    Back in stock with new low price!
    Click link below!
    http://castboolits.gunloads.com/show...Star-Crimp-Die


    also check in and say hello on my new face book page!
    https://www.facebook.com/BTSniper-153949954674572/

  3. #3
    Vendor Sponsor


    BT Sniper's Avatar
    Join Date
    Jan 2009
    Location
    Oregon next to the river
    Posts
    5,650
    Post saved for additional pics
    BTX Star Crimp Die
    Back in stock with new low price!
    Click link below!
    http://castboolits.gunloads.com/show...Star-Crimp-Die


    also check in and say hello on my new face book page!
    https://www.facebook.com/BTSniper-153949954674572/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check