WTB: Gas Checked .41 Mold

[Good Cheer]

Need to find a gas checked .41 mold.
Lyman #410610 might work.
NEI SWC GC would work.
The alignment pins cannot be beneath (in line with) the cavity or cavities.

[475/480]

I have a Ballisti-Cast 6 cavity .411-255 WFNGC . Perfect shape $ 250.00
I do have the Handles for it = $80


Sean

[littlejack]

Good Cheer
Not sure what's up with the alignment pins?Have you considered a plain base boolit mould, and buying plain base gas checks. I use plain base checks on my 410459.
You can buy from Sage's Outfitters for 29.
Just a thought.
Regards

[Good Cheer]

The deal with the pins is that my intent is to have modifications done to provide a plug as would be for a minie ball mold.
In this case it will be for an adjustable length nose plug with interchangeable ogive styles.
Done as with this .45 mold except for the front rather than the backside.

Will be using it in .41 revolvers and a single shot rifle.

[Good Cheer]

Good Cheer
Not sure what's up with the alignment pins?Have you considered a plain base boolit mould, and buying plain base gas checks. I use plain base checks on my 410459.
You can buy from Sage's Outfitters for 29.
Just a thought.
Regards

Thank you for the source on the gas checks.

[littlejack]

Now that is a whole different way to skin a cat.
Interesting concept.

[Good Cheer]

Anybody have an old single cavity 410610?

[Wally]

Why not use a RCBS 210 SWC? I shoot .41 Magnum; non-GC bullets work beautifully in it.

[Good Cheer]

For wanting the soft alloy options that gas checks help with.
An option pointed to by a forum member was plain base gas checks.
Another option is to use a 41027 HBWC, turn that nubbin nose into a gas check holder, and go from there. But I cannot bring myself to alter that beautiful old mold.

Anybody have a single cavity .41?

[KohlerK91]

Delete

[LeadHead72]

I have a 2-cav 410459 but it's not a GC. PM me if you have any interest.