Lee PrecisionInline FabricationRotoMetals2Wideners
ADvertise hereTitan ReloadingRepackboxMidSouth Shooters Supply

Results 1 to 5 of 5

Thread: Damaged Optics

  1. #1
    Boolit Buddy
    Join Date
    May 2006
    Location
    Fort Worth, TX
    Posts
    267

    Damaged Optics

    What do you all do with damaged optics?

    I have a cheap, older, spotting scope (but good enough for my purposes) that fell off the bench in the wind and had a lens break loose somewhere inside-- it doesn't work at all now. It's out of warranty and likely worth sending to the factory to fix.

    Do I just trash it? Seems like a waste; any suggestions? Tear it apart as a learning experience and maybe fix it (doubtful in my mind)?

    I had an older cheap Tasco scope that that didn't work, when it came on a rifle I bought. Same question years ago; its in a Oklahoma landfill somewhere now.

  2. #2
    Boolit Buddy
    Join Date
    Jun 2019
    Posts
    305
    I would have to take it apart just for the fun of it,and if you can't fix it then you are not out anything.

  3. #3
    Boolit Master
    TNsailorman's Avatar
    Join Date
    Dec 2006
    Location
    Northeast Tennessee Hills
    Posts
    1,591
    My Simmons spotting scope got knocked off the bench by a guy who was trying to look at a shot for me. It broke the 2 thumb screws on the tripod that came with the scope some years before. I called Simmons to see what it would cost to repair it. I was told to send it in and provided an address to send it to. I still had the old box that the whole outfit came in so I sent the whole outfit back in. It came back about 2 or 3 weeks later and they had not only repaired the tripod but had refurbished to whole scope. Nice people and I have remembered them to a number of people. I have one of their Rimfire scopes on my little 10-22 and it is a very clear scope. Holds zero just fine too. Long story short, check with the manufacturers--who knows, you might get a pleasant surprise. james

  4. #4
    Boolit Buddy Win94ae's Avatar
    Join Date
    Mar 2013
    Posts
    348
    I fixed a few scopes in my time. I actually replaced the messed-up cross-hairs in my first scope, with my own hair.

    I was able to fix all the scopes I opened-up.

    Fun to tinker with and see what is inside. Good luck!

  5. #5
    Boolit Grand Master Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    9,607
    If the company that made it is still in buisiness, they will most likely replace it with a new equivalent or better optic if you contact their customer service. I’ve had that experience with domestic and Oriental brands of scopes.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check