Titan ReloadingWidenersRepackboxInline Fabrication
RotoMetals2MidSouth Shooters SupplyLee PrecisionADvertise here

Results 1 to 6 of 6

Thread: WTS: shooting, reloading, and casting

  1. #1
    Boolit Master
    Join Date
    Apr 2017
    Location
    Minnesota
    Posts
    2,825

    WTS: shooting, reloading, and casting

    I am combining my old topics, I hope that this is allowed. I will be deleting those old posts.


    I prefer paypal, but will accept a money order.

    Accurate molds 31-140C. I designed this bullet specifically for the 327 federal Henry big boy rifle. It feeds fantastic in that rifle. It also works just fine in any handgun. It will need to be deep seated for a single seven, all other handguns work no problem. Mold is in very good condition. $50 shipped Sold
    Click image for larger version. 

Name:	31-140C.jpg 
Views:	96 
Size:	121.0 KB 
ID:	259106

    Lee 309-170-f *out of spec*. This mold cast undersized, about .307-.308" body, but I think the nose was still up around .299". I intended to use this for paper patching, but never got around to it. You could beagle it, and get usable regular bullets. Great condition, practically new. $15 shipped. Sold
    Click image for larger version. 

Name:	309-170.jpg 
Views:	82 
Size:	44.6 KB 
ID:	259107

    Finally we have a custom shotgun slug mold. This is the Accurate 73-943CN. It is a single cavity, brass mold. I had it hollow base converted by Erik at Hollowpoint molds. This is not a cheap conversion. The slug currently casts about 765 grains if I remember right, and .735" diameter. $125 shipped.
    Click image for larger version. 

Name:	73slug.jpg 
Views:	86 
Size:	53.4 KB 
ID:	259108

    This is a fair condition Lyman #55 powder measure. The hopper is slightly stained, and I lost the cover. Other than that, it works just fine. $50 shipped.
    Click image for larger version. 

Name:	lyman55.jpg 
Views:	79 
Size:	57.0 KB 
ID:	259109

    Mossberg 590 9 shot magazine for conversion. This is the magazine tube, spring, and end cap for a 12 gauge, 9 shot Mossberg 590. This will thread onto any Mossberg pump action 500, 590 7 shot, 835, etc. This will work with both standard 9 shot and A1 9 shot barrels. I will also include a barrel heat shield. I do not have a barrel to sell. Condition is brand new, unused. $45 shipped.
    Click image for larger version. 

Name:	magazinetube.jpg 
Views:	83 
Size:	13.9 KB 
ID:	259110

    I have a perfect condition cantilever rifled slug barrel for a Benelli Nova or Supernova. The barrel was made by Ithaca, and is chambered for 12 gauge 3" or shorter. I believe it is a 1:28" twist. These are impossible to find, and have not been made in quite some time. The one and only problem I've ever had is that some of the shell is exposed for the extractor. This caused some extraction problems on soft hulls like Fiocchi, but most were fine. I don't remember any problems with factory ammo. As odd as it sounds, one of the best shooting rounds I've found in this barrel was the Remington 3" 1 ounce Slugger. Mounted to it is a cheap Konus 1.5-5x scope. The scope is nothing spectacular, but works surprisingly well for what I paid for it. It has handled hundreds of rounds this far without an issue. I have not shot this barrel for years, and I think it is time to go to a better home. I would like $300 shipped
    Click image for larger version. 

Name:	nova barrel.jpg 
Views:	78 
Size:	179.7 KB 
ID:	259111

    Click image for larger version. 

Name:	nova barrel 2.jpg 
Views:	75 
Size:	35.0 KB 
ID:	259112

    I have for sale about 400 brand new Starline 327 Federal brass remaining. $100 shipped. Feel free to send me an offer, I am willing to split into smaller amounts.

    Click image for larger version. 

Name:	brass.jpg 
Views:	74 
Size:	121.4 KB 
ID:	259113

    .452" Lee push through sizing die. Sizes right at .452" $20 shipped. Sold
    Click image for larger version. 

Name:	sizers.jpg 
Views:	77 
Size:	108.2 KB 
ID:	259114
    Last edited by megasupermagnum; 03-27-2020 at 08:27 PM.

  2. #2
    I will take that Lee "out of spec" mold.

  3. #3
    Boolit Master


    blikseme300's Avatar
    Join Date
    Mar 2009
    Location
    Deep South Texas, RGV
    Posts
    1,553
    PM incoming for .452" Lee push through sizing die. Sizes right at .452" $20 shipped.
    Liberalism is the triumph of emotion over intellect, but masquerading as the reverse.

    I don't know how we ever shot maximum loads before P/C come along and saved us all. R5R

    "No mosque in the United States flies an American flag."

  4. #4
    Boolit Mold
    Join Date
    Nov 2016
    Location
    South Carolina
    Posts
    4
    I'd like 300 of the .327 Fed Starline brass. PM sent.

  5. #5
    Boolit Man
    Join Date
    Jul 2009
    Location
    CT
    Posts
    82
    I would like the Accurate molds 31-140C, PM being sent.

  6. #6
    Boolit Master
    Join Date
    Apr 2017
    Location
    Minnesota
    Posts
    2,825
    bump...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check