I have a friend who needs to feed a 1920 Colt DA 41 ......
Who has Boolits for this one? 500 needed.
Boss.
I have a friend who needs to feed a 1920 Colt DA 41 ......
Who has Boolits for this one? 500 needed.
Boss.
Have him contact Bernie at Old West Molds. My mold is a heeled, hollow based single cavity. Not interested in casting 500 of them!
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
Be aware that Lyman’s classic 386177 heel bullet when put on today’s 1.12 case length cases are too long for both the colt DA 41 and army special. The cases need to be trimmed lightly.
Can you use available .41Mag molds and reduce the back ends with a .386" diameter H&I sizer?
Will the Lee 195 grain SWC work?
Hey, by the way, why not use a hollow base in the reduced diameter tail end the same as everybody does for .22 rim fire?
.41 LC is loaded with either rebated bases or with hollow bases. But putting the two together has been shown to work.
You know, I shouldn't be making your ad a discussion. Apologies.
If I had the heal mold I'd make you some. All I have is the hollow base.
I have a SC Herters 41196 which casts a 196 grain heeled boolit. The sprue plate needs to be continually tightened so it needs to be drilled and tapped for a set screw.
Last edited by BrassMagnet; 03-24-2020 at 08:35 AM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |