Ok... I indicated an issue in another post with HiTek.
Well another solution was to lube with regular bullet lube. So I pull out the hidden Star liner and lube the bullets. For a moment I couldn’t remember what lube remained in the Star. No problem, the lubes I used in the past were all good. So I lubed them and shot them. All went well...
Funny thing happened... I remembered the homebrew lube mix and don’t think I’ve shared in the past. It works well for low to mid range loads. Easy mix with a 60/40 ratio... or 70/30 mix if you like the consistency. Here is where the coincidence comes in. Recipe is 60 of your favorite beeswax and the 40 is, ready....Corona ointment. Yes that’s right: