WidenersMidSouth Shooters SupplyTitan ReloadingRotoMetals2
Inline FabricationRepackboxADvertise hereLee Precision

Results 1 to 3 of 3

Thread: Leatherwood/Hi-Lux Sniper Scope is not "legal"

  1. #1
    Boolit Buddy
    Join Date
    Aug 2005
    Location
    Central Texas
    Posts
    441

    Leatherwood/Hi-Lux Sniper Scope is not "legal"

    A shooting friend has one of the relatively new and nice Leatherwood/Hi-Lux reproductions of the William Malcolm 8x USMC Sniper Scopes and was wondering if he could use it for either BPCR or 22 BPCRA. Since one can be picked up for $575 at Optics Planet and it comes with nice mounts similar to Unertl’s, Fecker’s or DZ Arms, I was curious enough to call Hi-Lux & get the actual measurements. The outside diameter (OD) of the objective bell housing at the widest part (knurled rings) is 36.1mm. The OD at the front is 35.0mm and the actual lens diameter is 31mm but ends up around 30mm due to the retainer ring.

    NRA BPCR silhouette rules state that any ocular or objective lenses, adjusting or assembly rings to be less than 1” (25.4mm) in diameter. 22 BPCRA rules state that any ocular or objective lens must not be larger than 1” as measured from the inside of the lens opening. Therefore the scope does not meet the rules for either type of sanctioned matches. In addition, the rear mount is click adjustable which is not allowed unless it can be de-clicked.

    BTW, if the mounts can be de-clicked, they can be purchased separately for $250, less than half the price of DZ Arms mounts, but they do not offer the extended elevation adjustment available with the DZ mounts. Utilizing a 7.2” mount spacing the DZ arms mounts have 200MOA of elevation adjustment vs. 125MOA for the Leatherwood/Hi-Lux.

    Wayne
    Last edited by texasmac; 03-23-2020 at 11:13 AM.
    NRA Life (Benefactor & President's Council) Member, TSRA Life Member, NSSF member, Author/Publisher of the Browning BPCR book.

  2. #2
    Boolit Master
    bigted's Avatar
    Join Date
    Mar 2009
    Location
    Sweet Home Oregon
    Posts
    4,263
    Wayne, all this is as it should be for the weapon it was intended to be mounted on. Namely the 03-A3 Springfield chambered in the old 30-06 round.

    I also think it would be a cool settup mounted on a BPCR ... but as you point out ... it will not pass inspection in sanctioned meets
    WHEN ALL IS SAID AND DONE...MORE WILL BE SAID THEN DONE

  3. #3
    Boolit Master Good Cheer's Avatar
    Join Date
    Jul 2010
    Location
    the Ark
    Posts
    3,501
    Been tempted to put one on a 1888 (7.9x57).
    But, I'd much rather have a long eye relief to clear the bolt handle (heavy sigh).
    The rifle was rebarreled by Richard Hoch with a 12" twist, supplied with a matching 185 grain gas check mold.
    My eyes aren't up to snuff these days so hmm, what kind of scope do I want?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check