I thought I would share a load that is working for my 1894 44 Mag. It is not a bench rest load, or rifle, but I am getting 4 bullets touching with a flyer. Flyer could be a number of things, but I doubt it is the load. This is at 50 yds with cheap scope and rested.
RCBS 240-SIL mould, powder coated, unsized, no gas check; 24.0gr IMR 4227, WLP primers, Star brass.
So far, I have had poor luck with 2400 and Blue Dot. Lee 240 TL has not worked as well and doesn't cycle as well either. Yes I have beveled the back of the chamber, I may need a new carrier.
My goal was to find a load with acceptable accuracy, with as little work as possible. Just cast, powder coat, and load.
Dan