Thanks for the information guys. I ordered a Forester hand held unit and a Lee cutter apparatus so I can use a drill. I only plan a couple thousand cases and time is available-money not so much! And just to re-iterate, I’m not necessarily interested in absolute accuracy as much as I am about “range brass” pickups that have various neck thicknesses. Some manufacturers case thickness is too much to allow proper release of the projectile which could cause over pressure issues. Safety first. Of course accuracy is a pleasant side effect! This is all for 223/556 converted to 300blkout. Might get into accuracy performance on other calibers later on, now that I’ll have most of the equipment. Nothing wrong with being better when you can get it.