ACTIVE - 223/556 NATO 65g HP or Solid - AR15 Rifle round

[Lakehouse2012]

Well let me try this again.

1 brass 3 cavity HP GC All Pins
kevmcclain at gmail dot com

Thanks!

Excellent, I've updated your request on post #.

Thanks,

[dimaprok]

The 65g would work well for a 1:9 if you are not pushing to the max powder load. and depending on coating or a GC

According to Berger Twist calculator at such short length 0.656" and such weight - 65gr the stability increases dramatically to the point that it will stabilize in 1:14 twist rate at velocity of 2400 fps and higher. The reason I believe it - is because I shot 60gr NOE cast bullets out of my 221FB which has twist rate of 1:14 and there was no keyholing and accuracy was good. I shot between 2560 - 2700+ fps and got between 1.5 - 2 MOA groups with slower being better. Powder coated and homemade gas checks. Now if that doesn't work out I do have .223 in 1:9 and 1:8 twist rate.

With that being said Lakehouse2012 please add me for brass 6 cavity solid gas check version. I really wish Miha could make NLG with GC but I realize that's not an option. This is going to be my first brass mold. email dimaprok at gmail dot com

[Lakehouse2012]

Thats good detail dimaprok!

I've put you into the GB in slot #5

Thanks,

According to Berger Twist calculator at such short length 0.656" and such weight - 65gr the stability increases dramatically to the point that it will stabilize in 1:14 twist rate at velocity of 2400 fps and higher. The reason I believe it - is because I shot 60gr NOE cast bullets out of my 221FB which has twist rate of 1:14 and there was no keyholing and accuracy was good. I shot between 2560 - 2700+ fps and got between 1.5 - 2 MOA groups with slower being better. Powder coated and homemade gas checks. Now if that doesn't work out I do have .223 in 1:9 and 1:8 twist rate.

With that being said Lakehouse2012 please add me for brass 6 cavity solid gas check version. I really wish Miha could make NLG with GC but I realize that's not an option. This is going to be my first brass mold. email dimaprok at gmail dot com

[HiVelocity]

Any idea when this GB will close?

HV

[Lakehouse2012]

Any idea when this GB will close?

HV

Hopfully very soon HV, I'm pushing Miha to move quickly on this one.

[HiVelocity]

Lakehouse2012-

Thank you, sir. Sure would be an amazing mold to have about NOW.

HV

[gvrj]

I'll take a 6-cav brass NLG and FB
george at rayclan dot net

[Lakehouse2012]

I'll take a 6-cav brass NLG and FB
george at rayclan dot net

Thnks Sir, I've got you on the list!

[coog83]

I'll take 2 of the 3 cavity HP molds.

3 cavity HP / Grooved / GC -- kpatton at take2 dot us
3 cavity HP / NLG / FLAT -- kpatton at take2 dot us

[AlHunt]

Lakehouse2012, I think I'm going to jump out of this one. I got an inferior non-HP mold to get me on track.

I'll stay subscribed and might jump back in when it goes to last call.

Thanks

[Lakehouse2012]

Thanks Coog, I've got you down for 2 molds, fingers crossed they start rolling soon...

I'll take 2 of the 3 cavity HP molds.

3 cavity HP / Grooved / GC -- kpatton at take2 dot us
3 cavity HP / NLG / FLAT -- kpatton at take2 dot us

[Lakehouse2012]

No Proglem At, I'll take you off.


Hope all is well,

Lakehouse2012, I think I'm going to jump out of this one. I got an inferior non-HP mold to get me on track.

I'll stay subscribed and might jump back in when it goes to last call.

Thanks

[Minerat]

I'm in for 1- 3 cavity, HP, NLG, GC - SteveOB at outdrs dot net

Thanks

[Lakehouse2012]

I'm in for 1- 3 cavity, HP, NLG, GC - SteveOB at outdrs dot net

Thanks

Thanks Steve, I've added you onto the list

[SeabeeMan]

Why did this have to catch my eye?!

I'm in for a brass 6 cavity, 66 grain solid NLG, flat base (only option if I understand right).

rich underscore kildow at hotmail dot com

[Lakehouse2012]

Well, I'm glad it caught your eye

Yes, you are correct, the NLG will only come as a FB.

You are all signed up, thanks!

Why did this have to catch my eye?!

I'm in for a brass 6 cavity, 66 grain solid NLG, flat base (only option if I understand right).

rich underscore kildow at hotmail dot com

[Stmtrn]

I need to back out of this one at this time. Thanks, stmtrn

[Sleeping Dog]

Can you put me down for

8 Solid, GC, NLG

[Lakehouse2012]

I need to back out of this one at this time. Thanks, stmtrn

No problem, I've removed you.

[Lakehouse2012]

Yes Sir, I will add you, but I need a disguised email to list, so that Miha can send you invoice when complete.

Can you put me down for

8 Solid, GC, NLG