Lee PrecisionWidenersInline FabricationTitan Reloading
ADvertise hereRepackboxMidSouth Shooters SupplyRotoMetals2

Results 1 to 8 of 8

Thread: Lube for sizing HiTek coated bullets

  1. #1
    Boolit Master
    Elkins45's Avatar
    Join Date
    Mar 2010
    Location
    Northern KY
    Posts
    2,407

    Lube for sizing HiTek coated bullets

    My impression is that Hi-Tek coated bullets are harder to seat in new cases and are harder to size in push thru dies than tumble lubed bullets are. I did't have the foresight to buy a bottle of their sizing lube when I bought my Hi-Tek powder but I feel like I need to give them a spritz of something before I jam them thru the dies. Has anyone tried a light coat of something like 45-45-10?

    Does the cured coating react with petroleum based lubes? I would hate to dissolve the coating away while they sit in the case because I tumble lubed them.

    How about a diluted solution of the Lee resizing wax? I may give that a try. It works really well as a case sizing lube. Or wire pulling lube?
    NRA Endowment Member

    Armed people don't march into gas chambers.

  2. #2
    Boolit Master
    Join Date
    Feb 2015
    Location
    Central Iowa
    Posts
    938
    I’ve used a spritz of water with good results for powder coated bullets that we’re hard to size. It helps reduce the friction a little with no residue. I’ve never used Hi Tek before but would bet anything you mentioned would work but I usually try the easier methods before jumping to more exotic options.

  3. #3
    Boolit Master
    Join Date
    Jun 2011
    Location
    Pleasant Hope MO
    Posts
    1,174
    I have use the Hornady One Shot to reduce sizing friction, your new cases might need some One Shot also.

  4. #4
    AKA: GRMPS Conditor22's Avatar
    Join Date
    Dec 2018
    Posts
    1,795
    Just mix 10 to 12 parts heet with some lanolin and spritz them lightly

  5. #5
    Boolit Bub
    Join Date
    Apr 2018
    Location
    Grave of Liberty
    Posts
    57
    Quote Originally Posted by Conditor22 View Post
    Just mix 10 to 12 parts heet with some lanolin and spritz them lightly
    This ^
    But the heet MUST be iso-heet (https://www.goldeagle.com/product/is...ector-cleaner/) - the regular heet contains methanol which will not work and is poisonous

    Or just use whatever case lube you normally use but at a reduced rate.

  6. #6
    Boolit Master
    Join Date
    Sep 2016
    Posts
    1,388
    Donnie Miculek sells a concentrated sizing spray from the HiTek manufacturer. It works well for me.

    http://hi-performancebulletcoatings.com/sizing-lube/

  7. #7
    Boolit Master
    Ausglock's Avatar
    Join Date
    May 2010
    Location
    NSW North Coast, Australia
    Posts
    2,909
    Nothing will react with cured HITEK.
    Choose your lube and size away...
    Hooroo.
    Regards, Trevor.
    Australia

  8. #8
    Boolit Master dikman's Avatar
    Join Date
    May 2013
    Location
    Sth Oz - A Land Downunder
    Posts
    2,017
    I guess it depends how much you have to resize them (and how hard the alloy is), I'm only doing 1-2 thou with pistol range scrap (approx. 14 BHN) and don't have any problem. I have used lube in the past but haven't noticed enough of a difference to bother. Bear in mind that Hi-Tek coating is slightly slippery by nature.

    As for seating in cases, I've never had any issues with the coating causing difficulties.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check