Load DataTitan ReloadingLee PrecisionWideners
MidSouth Shooters SupplyReloading EverythingRepackboxRotoMetals2
Inline Fabrication
Page 1 of 2 12 LastLast
Results 1 to 20 of 27

Thread: Question About Round Balls

  1. #1
    Boolit Man trapper44shooter's Avatar
    Join Date
    Feb 2020
    Location
    VA
    Posts
    84

    Question About Round Balls

    Fellas will I need to use any lube on my round balls for my cap & revolver I am a GREENHORN as you can tell buy I really want to learn how to cast my own all I need is the furnace I am going with that LEE 4 20 Production Pot that is really all I can afford I just want to get everything right

  2. #2
    Boolit Master
    Tom W.'s Avatar
    Join Date
    Mar 2005
    Location
    Phenix City, Alabama
    Posts
    3,855
    You will need some "Spit Ball" or Spit Patch or just plain Crisco to cover the balls to prevent any chance of a chain fire. It's been many years since I have fired my BP firearms, so I'm not so up to date on what is out there now.
    Tom
    μολὼν λαβέ


    Did I ever mention that I hate to trim brass?

  3. #3
    Boolit Master rondog's Avatar
    Join Date
    Mar 2009
    Location
    Denver, CO
    Posts
    1,838
    You'll want pure, soft lead for casting those, no hard alloys like wheelweights. You'd have a helluva time getting the balls into the chambers.

  4. #4
    Boolit Master
    nicholst55's Avatar
    Join Date
    Jan 2007
    Location
    Houston, TX Metro Area
    Posts
    3,606
    Quote Originally Posted by rondog View Post
    You'll want pure, soft lead for casting those, no hard alloys like wheelweights. You'd have a helluva time getting the balls into the chambers.
    You can break the loading lever, if the balls are too hard. Ask me how I know.
    Service members, veterans and those concerned about their mental health can call the Veterans Crisis Line to speak to trained professionals. To talk to someone, call 1-800-273-8255 and Press 1, send a text message to 838255 or chat at VeteransCrisisLine.net/Chat.

    If you or someone you know might be at risk of suicide, there is help. Call the National Suicide Prevention Lifeline at 1-800-273-8255, text a crisis counselor at 741741 or visit suicidepreventionlifeline.org.

  5. #5
    Boolit Master
    kens's Avatar
    Join Date
    May 2013
    Location
    coastal Ga
    Posts
    1,133
    yes, use soft lead, and the balls are a bit oversize to the cylinder
    as you load it, you shave off a tiny bit around the equator of the ball, seat it on powder
    then you top it off with crisco or favorite lube.
    my .45 cap&ball uses a .457" ball

  6. #6
    Boolit Master
    Join Date
    May 2012
    Location
    Outside Rolla, Missouri
    Posts
    2,170
    trapper, no, you don't need to lube the balls themselves. Seat them firmly on the powder then fill the remaining space as others have said, with the lube of your choice. Crisco works good.

    Or, you can use lubed felt wads under the ball. Several outfits sell them or you can make your own.
    "In general, the art of government is to take as much money as possible from one class of citizens and give it to another class of citizens" Voltaire'

    The common virtue of capitalism is the sharing of equal opportunity. The common vice of socialism is the equal sharing of misery

    NRA Benefactor 2008

  7. #7
    Boolit Grand Master

    Wayne Smith's Avatar
    Join Date
    Mar 2005
    Location
    Hampton Roads, Virginia
    Posts
    13,616
    Lubed wool felt wads are your best choice. I make mine with wool window felt and Emmert's lube, cause I made lots of Emmerts years ago!
    Wayne the Shrink

    There is no 'right' that requires me to work for you or you to work for me!

  8. #8
    Boolit Master Maven's Avatar
    Join Date
    Mar 2005
    Posts
    4,946
    What Wayne said!!!

  9. #9
    Boolit Grand Master


    Join Date
    Apr 2017
    Location
    Aberdeen, South Dakota
    Posts
    7,136
    I've tried Crisco over the ball, a Crisco soaked felt wad, and then nothing at all. So far my best accuracy has been with 25 grains FFg, a dry felt wad, and then the ball. No lube at all. I've not found a spec of leading, even with just a bare ball over 35 grains of powder.

  10. #10
    Boolit Master trails4u's Avatar
    Join Date
    Feb 2013
    Location
    Upstate, SC
    Posts
    1,364
    Quote Originally Posted by megasupermagnum View Post
    I've tried Crisco over the ball, a Crisco soaked felt wad, and then nothing at all. So far my best accuracy has been with 25 grains FFg, a dry felt wad, and then the ball. No lube at all. I've not found a spec of leading, even with just a bare ball over 35 grains of powder.
    I'm pretty much in this camp. I'm not gonna say chainfire doesn't happen....it obviously does, but you'll never convince me it happens from the bore end of a cylinder with a properly fitted ball. I use a lubed wad between powder and ball.....but only for ease of cleaning/fouling control. The guys I shoot with INSIST on Crisco over the ball......I just don't have the personal experience to support the need. Someday my mind may be changed....but until then, I just don't think it's necessary.
    "Do not follow where the path might lead, go instead where there is no path and leave a trail" Ralph Waldo Emerson

  11. #11
    Boolit Grand Master Outpost75's Avatar
    Join Date
    May 2013
    Location
    over the hill, out in the woods and far away
    Posts
    10,158
    Best is to get an Osborne punch of correct size and cut your own wads from window felt, cork gasket material or an old felt hat. You don't need to lubricate the wads. What I do is press a dry felt, card or cork wad over the powder and then apply a pea-sized dab of Crisco over the wad using a cake decorator before placing the ball over the chamber and seating it.

    You want a heavy enough powder charge that you can feel the powder compress before the rammer reaches the end of its stroke. If your powder measure doesn't throw quite enough powder to get good compression you can double up on the felt wadding or inject more grease under the ball.

    This is less messy than applying grease over the ball, the gun will be cleaner and will shoot well.
    The ENEMY is listening.
    HE wants to know what YOU know.
    Keep it to yourself.

  12. #12
    Boolit Master


    Walks's Avatar
    Join Date
    Jun 2016
    Location
    SoCal
    Posts
    3,028
    What Outpost 75 said.

    I have seen a chainfire once. Scary as Heck, I was holding the Timer at an "End of Trail"
    Frontiersman sidematch that called for 2 Cap & Ball Revolvers, a single shot cartridge rifle and a SxS shotgun. All loaded with Black Powder.

    The 1st round chain fired the next two in line. The revolver went sailing straight up & back over the shooters head. And right by mine. Landed 12-15 feet behind us.

    Shooter was burned along the top of his hand from 2nd knuckle all along the top of his hand back to the thumb joint. Shooter was firing left handed.
    No one was hit by the flying revolver.

    Very disturbing. I still shot the Sidematch myself, loading my Colt 1860 clones as described by Outpost 75.
    But having been made a bit nervous by what just happened, I smeared some lube to fill in all loaded chambers.
    I HATE auto-correct

    Happiness is a Warm GUN & more ammo to shoot in it.

    My Experience and My Opinion, are just that, Mine.

    SASS #375 Life

  13. #13
    Boolit Master Jedman's Avatar
    Join Date
    Nov 2014
    Location
    Lenawee County , MI
    Posts
    1,324
    I have watched Joesy Wales load his pistol many times and he doesn't use no stinking lube.

    Jedman

  14. #14
    Boolit Master


    Walks's Avatar
    Join Date
    Jun 2016
    Location
    SoCal
    Posts
    3,028
    It's Hollywood, what do you expect ?
    I HATE auto-correct

    Happiness is a Warm GUN & more ammo to shoot in it.

    My Experience and My Opinion, are just that, Mine.

    SASS #375 Life

  15. #15
    Boolit Mold
    Join Date
    Jan 2019
    Posts
    26
    My question is, using the prelubed felt pads. How long can you leave the gun loaded before the wads would effect the powder?

  16. #16
    Boolit Master

    sutherpride59's Avatar
    Join Date
    Jan 2016
    Location
    Houston Texas
    Posts
    525
    that would depend on your temperature and how lube soaked your felt wad is. If you only have just enough lube on your wads leaching should be minimal at all temperatures but shouldn’t be a problem unless you go way overboard with the lube. Whatever leached onto the powder will prevent a small amount of the powder from burning and it will be ejected when you fire the gun. I wouldn’t leave a loaded cap and ball gun overnight any way though. Would be too worried the powder might start to absorb moisture from the air and cause corrosion in my cylinder.
    90% professional 10% mature

  17. #17
    Boolit Master
    Join Date
    Dec 2018
    Location
    Capital Region NY
    Posts
    680
    Lube under the ball can get squeezed into the powder and kill it. Have seen fizzles with a ball stuck in the barrel as a result so maybe moderation is the key there?

  18. #18
    Banned
    Join Date
    Apr 2020
    Posts
    85
    there is no need for Crisco or grease crap ON the ball itself. First shot merely blows the goop off the other chambers making the gun rather nasty to clean.

    1. round balls NEED to be round
    2. round balls NEED to shave a ring when seated into chamber
    3. chambers need to be ROUND.
    4. caps need to be seated correctly on nipples.

    From all accounts of REAL shooters shooting percussion, the ONLY time you get a chain fire from the FRONT is if you violate rules 1, 2, 3. Every other chain fire comes from caps not fitting correctly, or from the nipples to long and recoil forcing nipples up against the recoil shield and waking you up.

    IF you study colt patents, after 1850 he DID work with bullet lubricator systems built into the rammer of the revolver and into the ramrod of rifles. All he did was make a little device that would drop about a half aspirin size drop of oil onto the projectile. All in the name of making it easier to clean.

    a drop of jojoba oil will do the same.

  19. #19
    Boolit Buddy
    Join Date
    Apr 2020
    Posts
    125
    Having been around cap and ball revolvers a lot, I think correct percussion cap fit is a very important to prevent hangfires.
    I make sure mine fit very snugly, and then give them a little squeeze before pushing them on just to make sure. If one is to fall
    off during recoil, I think a hangfire is quite likely.
    Luckily, I haven't had one......yet.

  20. #20
    Boolit Buddy
    Join Date
    Jul 2012
    Location
    Southern Utah Desert
    Posts
    485
    nikonuser:

    You forgot no. 5:

    round balls NEED to be round.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check