Some one I know sent me link on this and wonder if anyone has one and try it on cast boolits.
https://grip-n-pull.com/
Some one I know sent me link on this and wonder if anyone has one and try it on cast boolits.
https://grip-n-pull.com/
Life Member of NRA,NTA,DAV ,ITA. Also member of FTA,CBA
I had one nearly identical, though of much older manufacture, and it did just fine at pulling cast, but like anything else, deformed them enough that the bullets weren't re-loadable. Fine for pulling ammo down, but the cast bullets went back in the pot for remelt. A pair of old dull side cutters have the same end effect, are cheaper, and more universal, so that's what I went back to.
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
Ok that is what I was wonder about ,I will stick with the hammer puller I use then,I can reuse the boolits that way. It looks like would be ok with jacket bullets for what I seen on the video.
Life Member of NRA,NTA,DAV ,ITA. Also member of FTA,CBA
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |