RepackboxWidenersMidSouth Shooters SupplyTitan Reloading
Lee PrecisionInline FabricationADvertise hereRotoMetals2

Results 1 to 8 of 8

Thread: Max OAL that will feed in 1895 Marlin

  1. #1
    Boolit Master

    TCLouis's Avatar
    Join Date
    Mar 2005
    Location
    Middle TN
    Posts
    4,203

    Max OAL that will feed in 1895 Marlin

    Anyone have a real number for the max overall length that will feed through a current 1895?

    Not loading manual number, real number that will feed from magazine and clear for the carrier to pick up the round and lift it up into position.

    Then with the boolits I have we will see what will chamber.
    Last edited by TCLouis; 02-19-2020 at 09:58 PM. Reason: Change wording and add information
    Nothing is impossible for the person that does not have to do it.

  2. #2
    Boolit Master Harter66's Avatar
    Join Date
    Jan 2010
    Location
    90 miles North of Texarkana 9 miles from OK in the green hell
    Posts
    4,461
    I load a 2010 45-70 1895 G . It will just make a 2.555" .
    In the time of darkest defeat,our victory may be nearest. Wm. McKinley.

    I was young and stupid then I'm older now. Me 1992 .

    Richard Lee Hart 6/29/39-7/25/18


    Without trial we cannot learn and grow . It is through our stuggles that we become stronger .
    Brother I'm going to be Pythagerus , DiVinci , and Atlas all rolled into one soon .

  3. #3
    Boolit Master Drm50's Avatar
    Join Date
    Jun 2016
    Location
    SE Ohio
    Posts
    1,603
    AOL in Marlin levers for straight case cartridges can be affected by bullet shape for feed purposes.
    Traditional round nose lead boolits would be what AOL is based on. Other bullets will clear as far as AOL but will not feed into chamber properly.

  4. #4
    Boolit Master waco's Avatar
    Join Date
    Jan 2009
    Location
    Springfield, Oregon
    Posts
    2,978
    Each gun is different. You'll just have to figure that out with the bullet you want to shoot.
    The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
    Proverbs 1:7

  5. #5
    Moderator



    Join Date
    Jun 2013
    Location
    NW GA
    Posts
    6,616
    Each Gun is a study of itself. I’ve had some feed cartridges fine and other jam 1/8” into the lands. Make up some dummy cartridges and see how they do.

  6. #6
    Boolit Bub
    Join Date
    May 2017
    Location
    NH
    Posts
    62
    Generally my 1971 1895 will feed a rounded FN @ 2.55" OAL fine.
    There is a specialty shop in AK that builds 1895s that will feed a slightly longer shells but they do modifications to the frame and lifter to make them work. Don't hold me to this but I think they will feed their special shells at 2.65-2.70". Really not much difference. Think name is Wild West Guns.

    If you want to reload long nosed bullets, just trim back the case to the point where the OAL works and the case can be crimped into the correct groove. Have done this with 38 Special cases using long nose bullets in 357 guns.

  7. #7
    Boolit Master
    Join Date
    May 2013
    Location
    Eastern WY
    Posts
    939
    There are a series of increasingly difficult changes that can be made to the Marlin 1895 to increase COL capability. Even without modification, the bullet shape can affect function. 2.55 is the standard but you will need to work with your bullet for your 'real' COL. M.L. McPherson ran a series in Precision Shooting magazine explaining and showing the changes. He has a book on Amazon with some of the information but some of the pictures are missing.

  8. #8
    Boolit Master Shawlerbrook's Avatar
    Join Date
    Nov 2015
    Location
    Central NY
    Posts
    1,052
    I also believe that the OAL can to some degree, be increased by a gunsmith. I know someone that had a Marlin rechambered to 307 Winchester and had the overall feed length increased some to accommodate the longer .308 Hornady flextip bullets made for the 308 ME.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check