RepackboxInline FabricationMidSouth Shooters SupplyTitan Reloading
Lee PrecisionWidenersADvertise hereRotoMetals2

Results 1 to 6 of 6

Thread: Looking for a custom 12 Gauge Rifled barrel

  1. #1
    Boolit Buddy
    Join Date
    Mar 2019
    Posts
    119

    Looking for a custom 12 Gauge Rifled barrel

    Ok guys, I am about to the limit of what my H&R Ultra Slug can handle for the 12 Gauge from Hell. To get to near the max potential for the cartridge, I am moving to a Savage 212. However, I am needing to swap the barrel for a thicker and longer option than the factory. The dimensions I am looking for are 1.25" diameter (no taper), 30" long, with a 1-20" twist. Shaw has a barrel that comes close, but the barrel is only 24" long and has a 1-28" twist. I am really needing a longer barrel to squeeze out some extra velocity, and the twist rate of 1-20" will be good for slugs up to 1000 grains.

    I am pretty sure Pac-Nor used to make 12 gauge barrels, but with their recent fire, I don't know if they are up and going yet. Does anyone have any ideas of where to look?

  2. #2
    Boolit Master pietro's Avatar
    Join Date
    Mar 2008
    Location
    New England
    Posts
    3,891
    .

    Hastings carries a 30" Verney-Carron barrel blank, but the only one on their website is a 20ga.

    https://www.hastingsdistribution.com...duct_list&c=63

    I would suggest contacting them to find out if they will/can supply a barrel that meets your needs.

    https://www.hastingsdistribution.com...w&p=contact_us


    .
    Experience is a wonderful thing - It lets you recognize a mistake, when you make it again.

  3. #3
    Boolit Grand Master
    Join Date
    Aug 2005
    Location
    South Jersey
    Posts
    5,432
    Bigbore, the best slug barrel ever made was the Ithaca Rifled Deer Slayer barrel. Save your money and for $525 (shotgun and barrel) you have what you want instead of the H&R
    Regards
    John

  4. #4
    Boolit Master

    nicholst55's Avatar
    Join Date
    Jan 2007
    Location
    Daegu, Korea
    Posts
    3,079
    ER Shaw offers replacement barrels for the Savage 212 in different contours, but they are only 1.055" at the breech.

    https://www.shawcustombarrels.com/sh...savage-bull/28
    Service members, veterans and those concerned about their mental health can call the Veterans Crisis Line to speak to trained professionals. To talk to someone, call 1-800-273-8255 and Press 1, send a text message to 838255 or chat at VeteransCrisisLine.net/Chat.

    If you or someone you know might be at risk of suicide, there is help. Call the National Suicide Prevention Lifeline at 1-800-273-8255, text a crisis counselor at 741741 or visit suicidepreventionlifeline.org.

  5. #5
    Boolit Master Nobade's Avatar
    Join Date
    May 2005
    Location
    Albuquerque, Nuevo Mexico
    Posts
    4,729
    Oregon barrel company makes up to a 4 bore. I'd give them a call and see if they can make what you want.

  6. #6
    Boolit Master
    Join Date
    Jan 2010
    Location
    behind enemy lines
    Posts
    651
    In my shaw barrel i shoot 900 grain hollow base slugs fine seems very stable out to 100 yards. But it is shorter then you want I wanted longer also.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check