ADvertise hereRotoMetals2RepackboxLee Precision
Titan ReloadingMidSouth Shooters SupplyWidenersInline Fabrication

Results 1 to 16 of 16

Thread: WTB a Wadcutter seating die for 38/357

  1. #1

    WTB a Wadcutter seating die for 38/357

    Just got a batch of wadcutters but no wadcutter seating plug. Tried using the existing hardware but it's deforming the bullets. 38/357, any make except Lee

  2. #2
    Boolit Master
    Join Date
    Oct 2013
    Posts
    769
    if you don't need one of the ones you have fill it with jb weld and sand it flat so the metal shows evenly around the edge

  3. #3
    Boolit Master
    Join Date
    Jan 2009
    Location
    Nashville, TN.
    Posts
    662
    Stuff any nose punch with Aluminum foil and press it in good. Worked fer me.
    Good luck

    Mike

  4. #4
    Boolit Master
    Join Date
    Mar 2014
    Location
    Lesage WV
    Posts
    662
    what brand die ?

  5. #5
    Quote Originally Posted by too many things View Post
    what brand die ?
    Any kind except Lee. Lee seating dies are manufactured to tighter tolerances than RCBS, when the case goes into the die, the expanded mouth of the case gets un-flared.

  6. #6
    Boolit Master StuBach's Avatar
    Join Date
    Dec 2015
    Location
    Michigan
    Posts
    609
    My Dillon seating die has worked fine for me seating my wadcutters. Canít recall which side I used but seemed to work fine on my HG#50s and looked/operated just as well as my Star die made for that particular mold.

    My Dillon dies are the newer series (not sure when they changed but they are different design than my dadsí Dillon dies from the 90s.)

  7. #7
    Boolit Buddy
    Got-R-Did's Avatar
    Join Date
    Aug 2009
    Location
    Kentucky
    Posts
    361
    Hard cast double end wadcutters, or button nose hollow base wadcutters?
    Got-R-Did.

  8. #8
    Boolit Buddy


    RedHawk357Mag's Avatar
    Join Date
    Feb 2010
    Location
    Duncan, Oklahoma, United States
    Posts
    490
    I had drama once setting some crazy bullet once... I used JB Weld to make a custom seating stem I thoughly covered interior of die with neutral shoe polish. Acts as a release agent, kinda like bedding a scope rail on a rifle. Fill stem with JB Weld install die place a dummy round in the ram with problem child bullet coated with release agent and run ram up and screw die/bullet stem until lite contact. Worked great for me. The wadded aluminum will work to get some rounds loaded till you find a permanent solution.

    On another note... problem I encountered some times was an expander going deep enough in a case to prevent lite swaging of softer alloys. In 357 PMC, Armscor would definitely swag some of my bullets. Remington brass usually didn't.

    Sent from my XT1650 using Tapatalk
    Ruger RedHawk 357 Mag 44 Mag GP100 Davidson Exclusive 5" Security Six 2 3/4", Speed Six 4"
    Smith Wesson 629 PP and 686 PP, 617

  9. #9
    Vendor Sponsor
    Jhopson's Avatar
    Join Date
    Nov 2018
    Location
    Indiana
    Posts
    34
    Look into the universal seating die from Mighty Armory. I have one and it has worked on every pistol bullet profile that I load.


    Sent from my iPhone using Tapatalk
    John 15:13
    Greater love hath no man than this, that a man lay down his life for his friends.

  10. #10
    Boolit Man
    Join Date
    May 2018
    Posts
    78
    Click image for larger version. 

Name:	DSCN1729.jpg 
Views:	33 
Size:	46.7 KB 
ID:	256704

    Is this the kind you are looking for? $25 and I will handle the shipping, priority.
    Zingger

  11. #11
    Nope, that's a semi wqadcutter die but thanks for posting . . .

  12. #12
    Boolit Buddy
    Join Date
    Nov 2011
    Location
    Indian trail NC
    Posts
    490
    i thought you could reverse lee seating dies and give it a flat surface for wad cutters???

  13. #13
    Boolit Buddy
    AZ Pete's Avatar
    Join Date
    May 2005
    Location
    Arizona
    Posts
    347
    you can also fill the end of a seating stem with hot glue and press the bullet nose into it to mold it to a fit.
    NRA Endowment Life Member

  14. #14
    Moderator Emeritus
    garandsrus's Avatar
    Join Date
    Jan 2006
    Location
    Warren, MI
    Posts
    2,569
    Pm sent.

  15. #15
    Quote Originally Posted by garandsrus View Post
    Pm sent.
    My luck day! Another member has offered to make me a seating stem and thanks to everyone who responded to my post.

    I emailed RCBS and asked them for help before I posted on this forum and as of today they haven't responded to my e-mail. Good thing I am registered with this web site.

  16. #16
    Over Christmas I also requested a wadcutter seating stem from RCBS. The eventually responded and said they would send 1 for free. I was happy but received another SWC stem. I then had the machinist at work modify it to work with button nose WC's.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check