RotoMetals2MidSouth Shooters SupplyRepackboxTitan Reloading
WidenersInline FabricationADvertise hereLee Precision

Page 2 of 2 FirstFirst 12
Results 21 to 24 of 24

Thread: type 38

  1. #21
    Boolit Grand Master Texas by God's Avatar
    Join Date
    Mar 2016
    If headspace is too long, rechamber it to- gasp!- 6.5 Creedmoor ! The action can take it.

    Sent from my SAMSUNG-SM-G930A using Tapatalk

  2. #22
    Boolit Master
    Join Date
    Jul 2014
    I always opted for the old 6.5 x 257 Roberts.
    That was one nice round.
    But not a Factory round.
    It out shot my .257 Roberts because of the Chrome lined bore on my type 38

  3. #23
    Boolit Master
    Join Date
    Mar 2005
    Loading the Type 38

    The brass will bulge when fired.
    You can tape it up for the first shot or you can turn the rims down on .303 Brit brass and form your cases.
    Others form brass from 7.62 Nato but it is tough to swage the case head down to .450.

    Do no use bullets heavier than 140 grains and do not use boat tails.

  4. #24
    Boolit Master rmcc's Avatar
    Join Date
    Aug 2010
    Central Iowa
    Thanks for all the replies!! Shot 38 today at 100 yds, off rest of course. With a 6 o'clock hold on SR1 target, first 2 shots were in 10 with 1x. Needless to say I was pleased!! Load was Hornady 160 gr RN over 30.5 gr of IMR 4320. I will not be searching for another load! Going to order some more brass and bullets from MIdway tonight. What a fun gun to shoot.

    fools rush in where angels fear to tread...Alexander Pope

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check