Been reading up getting ready to make the jump into a new to me caliber & rifle . Rifle is a T/C Encore 20" 1 in 16" MGM barrel . According to the numbers my best choices appear to be W296 / H110 , 4227 , Lil Gun , 300MP , VVN-120 , Acc 1680 . Faster such as 2400 , VVN-110 & RS Enforcer probably won't give best velocities without hitting the pressure wall first . Slower like RL 7 & 4198 pretty sure won't get me there either . I can see my Oehler's gonna come in handy . Lucked into 1K each Rem new cases & 180 SJHP for a good price . I already cast the LBT 180 WFNGC which I'm hoping will work out well . I might also get some 358627GC to try . My hopes are cast with an extruded powder ( throat life ) will give me acceptibly accurate with good velocity . Jacketed selection in this size is for the most part too soft ( explosive @ Max speeds ) or too hard ( 35 Rem speed needed ) . For deer they'd probably work just fine , but I primarily hunt hogs . Pass through with blood trail & ability to take out shoulders are what I want . If any want to post data just give a starting load to work from & I can go from there .