Wtt molds only

[ACC]

I have three boolit molds to trade. I don't sell I trade.

1. NEI Double Cavity 130308 GC - This bullet was designed by my brother and is of very high quality.

2. NEI Double Cavity .570 round ball mold for a .575 Zouave rifle or .57 caliber Hawken rifle - Very high quality

3. A T/C .45 caliber Maxi-Ball mold made for T/C by Lyman. A single cavity,

The NEI molds come in a Lyman orange box since the box they originally came in was a card board one. They also have the original hex wrench that came with each mold. The 130308 GC was designed for the 7.62X39 but drops from the mold at 135 grains so could be used in any .308-.312 as it drops from the mold at .3115.

I am asking for two Lee double cavity molds for all three or two or one.

The Lee:
TL356-95-RF
358-158-RF

All of the above molds have had very few if any boolits cast in them.

Please PM me if you are interested. I have included the best picture I could take, since I ain't no good at taking pictures.

[redneck1]

So to clear up any confusion ... you want two Lee molds for one of either of the three right ?

Surely not all three of your molds for two Lee molds ...

[brewer12345]

Don't have the molds you want, but would happily buy the 2 cavity 570 round ball if you change your mind about selling. Heck, I could just order you a Lee mold in return.

[ACC]

Two Lee molds for these three molds I have.

Just order them and have them shipped to my house. Easy pesy, Lemon Squisy.

PM Me if interested.

ACC

[ACC]

So to clear up any confusion ... you want two Lee molds for one of either of the three right ?

Surely not all three of your molds for two Lee molds ...

Yep two Lee molds. Or if you just want one, it is still two Lee molds. Or if you just want two, it is still two Lee molds.

ACC