How long after casting bullets ,, should we wait to size & lube ,, ( ya' after they cool ).
coffee's ready .. Hootmix.
How long after casting bullets ,, should we wait to size & lube ,, ( ya' after they cool ).
coffee's ready .. Hootmix.
Depends. Random plinking pistol bullets I'd size and lube the same day. High velocity rifle bullets cast of 90/6/4 and water dropped sit for at least a month to achieve full hardness.
The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
Proverbs 1:7
Once I get set up & casting, I do all I'm going to do for awhile, maybe even years for some calibers.
After I'm done, I size & lube sort of whenever I'm caught up on other projects, and get around to it.
Usually about 2 weeks.
In school: We learn lessons, and are given tests.
In life: We are given tests, and learn lessons.
OK People. Enough of this idle chit-chat.
This ain't your Grandma's sewing circle.
EVERYONE!
Back to your oars. The Captain wants to waterski.
so sizing puts a halt to the hardening process?
As soon as the lead cools
Regards
John
With ternary alloys, as mentioned, not as much as many think but the variable is directly related to the amount of and proportion to each other of the antimony and tin in the alloy.
If you're wanting to know the minimum wait we should do and not what we usually wait then; AC'd bullets should sit (age) for a minimum of 7 - 10 days, preferably longer before sizing, lubing and/or GCing. WQ'd or HT'd bullets should age a minimum of 7 - 10 days if not longer before sizing.
Binary bullets of lead an tin alloy can be sized, lubed, loaded and shot as soon as you want.
Now with that being said I have sized, lubed and shot the next day a lot of AC'd COWW alloyed pistol bullets as soon as they had cooled enough to be handled. Of course that was before the internet and advent of forums so I didn't know any better...….
Larry Gibson
“Deficient observation is merely a form of ignorance and responsible for the many morbid notions and foolish ideas prevailing.”
― Nikola Tesla
Air cooled- size and lube anytime.
Oven heat treated, water cooled , containing antimony, may take up to 2 weeks to fully harden. Size before they get harder. Diameter will not change.
Dropped from mold to water, hit and miss accuracy for me. Some will harden same as oven heat treat, some will not.
IMO.
It also depends a little on how much you plan to size. I've got a couple of molds that cast several thousands above what I want-- ones I usually size in two steps. I size those as quickly as I can after casting, before they harden, just to make that first sizing step easier. Then I might let them set and finish final sizing/lube later.
Hick: Iron sights!
I wait at least 2 weeks after powder coat to size because they continue to grow at least that long. All my bullets are air cooled. If you don’t believe this, size some the same day, and then size them again in 2-3 weeks. Some don’t seem to grow, but most do.
Due to the price of primers, warning shots will no longer be given!
Air cooled bullets, I size and lube anywhere from the next day to six months or more. Depending, on what else I have going on. All my pistol/carbine bullets are air cooled. I don't water drop, any alloy. IME, air cooled bullets will reach close to their final BHN, after three days of being cast. They will gain 1-2 BHN after three weeks..........as measured on an LBT hardness tester.
High velocity rifle bullets are always oven heat treated, after installing gas check and sizing. Try to get this step done, ASAP, because they are significantly harder to run through a sizer...........especially a Star, the longer you wait. Conventional lubing is done, with a die just a bit larger than the initial sizing, anytime after the heat treating.
Winelover
Everyone's approach is different.
I tend to do things in cycles. I cast everything I need from about November through January or so. Bullets get dumped into old 3# coffee cans. I size and lube them as my stocks of sized and lubed bullets get used up. I'll generally have several hundred of each bullet sized and lubed, ready to load. I pack them base down in tiered cardboard boxes. So, I might be loading bullets lube sized a year ago, cast two or three years ago.
I'm not saying that's the only way to do it, but that's what works for me.
Mine are all air cooled,, I have been sizing after 12-? hrs. after casting ,, I now have a 450 lube sizer ( the more you do the more tools ya' got ta' have ) , Thanks for all the options .
coffee's ready ,, Hootmix.
Air cooled boolits are easier to size the same day or the next day .... they begin to age harden in a short time time . After a week I can notice a difference in sizing hardness .
If the sizing is minimal ...don't worry about it but sizing down .003" or more try to get it done the next day for easiest effort .
My alloy is 50-50, COWW / soft lead
Gary
Certified Cajun
Proud Member of The Basket of Deplorables
" Let's Go Brandon !"
It depends on the amount of sizing force.
Oversized and heat treated hard alloy I would size immediately after cooling.
Air cooled, softer, close to final size, get sized whenever I get around to it.
Days, weeks, months later, doesn’t seem to matter.
I am only casting plinking handgun boolits, so perfection isn’t my game right now.
When playing with heat treating last year I had one batch that cast a little oversize (gunk on mild faces) that sat for a while after heat treating, maybe a few weeks.
After knocking one back out of the sizing die I gave up and back in the casting pot they went.
Too hard and too large to size down without risking breaking my cheap Lee single stage.
Sent from my iPhone using Tapatalk
All of my cast are air cooled. All of my .40 S&W are the same alloy of 20 lb COWW: 1/2 lb Monotype. They’re always sized with a Star lubrisizer. Once I cast a pile of ‘em and didn’t get around to sizing them for 3-4 weeks. That was the most difficult sizing I’ve ever done. I assumed that they got harder but didn’t have a hardness tester at the time. Should have measured the diameter but didn’t so I’ll never know if they grew or age hardened. From that time forward I’ve tried to size that alloy the same day they’re cast or no later than the following day.
Sometimes life taps you on the shoulder and reminds you it's a one way street. Jim Morris
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |