I bought a bunch of ACME 78 grain cast lead round nosed bullets sized 0.313" for a 32 AUTO pistol. When I seated and crimped them they didn't fit in the chamber of the pistol as they are too large in diameter by about 0.002". So, I resized the already sized and lubricated bullets with a 0.310" die, resulting in a final size of 0.311", which loaded, crimped and just fit in the chamber, and shoot very well. Well along with the 100 bare lubricated bullets I bought a 500 count box of the same bullet coated with a red paint of some sort. And they have the same problem not fitting in the pistol. My question is, can I resize them like I did with the bare lead lubricated bullets, and if I do should I also apply lubricant in the groove?