Anybody Make A .35 Long Neck?

[beltfed]

How about this one:
My 358 Long Neck Beltless Magnum.
built to shoot 282 and 300 grain cast bullets
as well as big jacketed ones.
Started with a McGowan 358 Norma Mag chambered /Savage 110 barrel
Faced off barrel breech end to eliminate the belt.
Ran my 35 Neck and Throat cutter in an appropriate amount
Cases: turn off belt, size in 358 NM FL die, Size again in 350 RM die to push back shoulder

Left to right:
35 cal Clymer Neck and throat reamer
My 358 Win 250 gr PP deer load
3 - 358LNBLM, loaded with 282 lyman and a 250 gr speer
Std 358 Norma Mag
Std 350 Rem Mag
Above is a 300 gr NEI bullet.
beltfed/arnie

[beltfed]

Here is the pic of my 358 Long Neck Beltless Mag ctges,etc

[uscra112]

I've half-finished a .35 Krag project. On a Krag action. Using a .35 Winchester reamer and dies. Been stalled for a quite a while because JES badly screwed up the rebore of my best spare barrel. Haven't had the gumption to send another barrel to a better vendor.