I have an oak ramrod from TOW that's stained what I call red oak. I need to darken it to match a TC walnut stock a little better. Is there an easy way to darken it without totally refinishing it?
I have an oak ramrod from TOW that's stained what I call red oak. I need to darken it to match a TC walnut stock a little better. Is there an easy way to darken it without totally refinishing it?
Dark Brown leather stain from Michaels craft store? Maybe too dark? Try little spot near end hid in stock.
Leather dye will work, assuming the ramrod isn't too oily. I use ferric nitrate on new rods to darken them. You would do yourself a favor to find a split hickory ramrod if you want it to last.
The solid soft lead bullet is undoubtably the best and most satisfactory expanding bullet that has ever been designed. It invariably mushrooms perfectly, and never breaks up. With the metal base that is essential for velocities of 2000 f.s. and upwards to protect the naked base, these metal-based soft lead bullets are splendid.
John Taylor - "African Rifles and Cartridges"
Forget everything you know about loading jacketed bullets. This is a whole new ball game!
.
If you're patient enough, and your RR doesn't split during use (why it's recommended a RR be made by splitting wood ILO turning one like a dowel), it should darken naturally from use.
Although YMMV, I always allow my RR's and brass stock furniture darken into an aged patina, much preferring the patina to a shiny gloss.
.
Now I lay me down to sleep
A gun beside me is what I keep
If I awake, and you're inside
The coroner's van is your next ride
Burnt Umber ... https://www.earthpigments.com/burnt-umber-pigment/I need to darken it to match a TC walnut stock a little better.
Regards
John
John Boy,
I'm not familiar with this product, Burnt Umber, is it a powder and how do you use it? Thank you.
Bob
SMOKELESS IS JUST A PASSING FAD!-STEVE GARBE
FORMER NJ HUNTER EDUCATION INSTRUCTOR
GOA LIFE MEMBER
SASS LIFE MEMBER
ADAPT, IMPROVISE, OVERCOME!
"ANY MAN WHO THINKS HE CAN BE HAPPY AND PROSPEROUS BY LETTING THE GOVERNMENT TAKE CARE OF HIM, BETTER TAKE A CLOSER LOOK AT THE AMERICAN INDIAN!"-HENRY FORD
My bad, it is a hickory rod, but it's somewhat red in color from their stain. I'll try the leather stain. Thanks y'all.
Give it a good wet Acetone bath first.
Are you sure it's oak - my guess it's hickory . . . .
a leather dye is a good suggestion if you're trying to match the stock color . . .
On a good straight grain hickory ramrod, if I wanted it darkened up for one of my rifle builds, I would take a propane torch and gently darken it with the flame - not scorch it. Then I would rub in a number of coats of BLO.
I have also used an old-timer's suggestion that was at one time printed in the Dixie Gun Works Catalog back in the early 60s. Soak the ramrod in coal oil. It won't darken a hickory ramrod but it will certainly provide a durable finish. Once I hd a rifle built and the ramrod fitted, I would just slide it in to a 4' length of 1 1/2 PVC Schedule 40 capped on one end - putin the ramrod and fill the PVC up with coal oil and slide a cap on the top end and lean up in a corner in the shop. Let it sit for a few weeks and then rub down with steel wool and more coal-oil followed by sitting aside to dry - optional coat of BLO thinned down with "real" turpentine. That process gives the hickory ramrod a nice "patina" but it's not going to match a stained stock.
Go shoot with it.
Your dirty grubby blackpoweder reside hands will fix it right up
Sent from my SM-G960U using Tapatalk
I like to burn my ramrod over a candle flame and make it have a little more detail.
Sort of like a Candle Camo pattern.
you should have black walnuts there try the husk
Wood stain, naturally - use some coffee, or perhaps some tea. Tea tends to be a bit on the red side. Coffee works good, fresh or stale. Sumac bark or walnut or hickory nut husks - chopped up and soaked makes good stain too, and is very traditional. 10
10 gauge: as per Robert Ruark, "use enough gun"
MOLON LABE
"I have a list, and am prepared for widespread civil disorder!" 10 ga
A torch works wonders.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |