Lee PrecisionInline FabricationTitan ReloadingRotoMetals2
ADvertise hereWidenersRepackbox

Results 1 to 3 of 3

Thread: Developing lads with new Brass for 45-100

  1. #1
    Boolit Mold
    Join Date
    May 2016
    Location
    Missouri
    Posts
    18

    Developing lads with new Brass for 45-100

    Anyone develop loads using new unfired FL sized neck expanded brass, or is it necessary to use fireformed brass. Question 2, do you seat the bullet using slip fit in fired brass with no sizing or do you neck size?

  2. #2
    Boolit Grand Master

    Join Date
    Mar 2013
    Location
    Northwest Ohio
    Posts
    11,268
    I load for a 45-90. with new brass I size to make sure its round and right expand to a slip fit load and hand seat the bullet. I then set the neck tension with a bushing die. In fired brass I clean prime charge compress with wad stack and hand seat bullet again setting a light neck tension with the bushing die. I also anneal new brass and lightly trim before the first loading.

  3. #3
    Boolit Master
    Join Date
    Dec 2008
    Posts
    1,701
    This is basically what I do with new brass in my match rifles:
    - anneal the brass
    - size the brass the absolute minimum amount to get it to chamber. It might not need any sizing at all.
    - If the bullet is a nice slip fit ( can't wiggle it at all when inserted into case mouth ) then I'd shoot them with a slip fit.
    - if the bullets are a sloppy fit, size the cases as little as possible to make for a slip fit, or size them with the die backed out 3 or so turns and use an expander that is 0.001" under bullet diameter.

    There won't likely be a much difference in how new brass shoots verses fire-formed. If the chamber is not very tight then the case might hold a grain or two more after fire-forming. That is something you'll just have to play with.

    Chris.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check