ADvertise hereTitan ReloadingInline FabricationRotoMetals2
MidSouth Shooters SupplyRepackboxLee PrecisionWideners

Results 1 to 11 of 11

Thread: Adding Deeper Grease Grooves to existing Lee 230gr .309 Alox Mold

  1. #1
    Boolit Buddy
    Join Date
    Jul 2006
    Posts
    302

    Adding Deeper Grease Grooves to existing Lee 230gr .309 Alox Mold

    Is there anyone that can cut some grease grooves in an existing Lee tumble lube bullet mold I have? Its a 2 cavity TL309-230-5R

    I am getting tired of PCing them and hate Liquid Alox. Its a great bullet that need some lube grooves.
    So many toys........so little time.

  2. #2
    Boolit Grand Master



    M-Tecs's Avatar
    Join Date
    Apr 2008
    Location
    Minnesota
    Posts
    5,700
    Nope cutting the mold won't do it. You would have to add material to the mold to make that happen.
    2nd Amendment of the U.S. Constitution. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."

  3. #3
    Boolit Master
    Join Date
    Jan 2010
    Location
    Tom, VA
    Posts
    4,663
    +1 Or you could cut the mold to drop a larger diameter bullet. Hardly seems worth the trouble for such an inexpensive mold though.

  4. #4
    Boolit Master

    rancher1913's Avatar
    Join Date
    May 2015
    Location
    plains of colorado
    Posts
    2,313
    you will also be changing the boolit dynamics and it may not shot worth a dang after the mods.
    if you are ever being chased by a taxidermist, don't play dead

  5. #5
    Boolit Buddy
    Join Date
    Jul 2006
    Posts
    302
    Quote Originally Posted by M-Tecs View Post
    Nope cutting the mold won't do it. You would have to add material to the mold to make that happen.

    Right you are!
    I was thinking in reverse looking at the bullet I turned on the lathe to put grooves in it.
    So many toys........so little time.

  6. #6
    Boolit Grand Master

    Join Date
    May 2005
    Location
    Castlegar, B.C., Canada
    Posts
    6,662
    Something you might try is to "hot tumble lube" with something like Ben's Red or some other lube that melts.

    I started doing that some time ago because I didn't like LLA. I made some lube similar to and at about the same time as Ben made his Ben's Red. I was trying to make a Felix lube but didn't have the correct ingredients so went with what I had. It worked pretty well but wasn't good for pan lubing so I decided to melt some in an old cast iron frying pan and roll the boolits in it. They coated nicely and unlike LLA, they were "dry" as soon as they cooled so no sticky mess. I get a very thin film on the nose but most at the lube grooves. It holds on well and works in both my .44 mag. Marlin and .303 British rifles.

    I use just enough lube melted in the frying pan to coat a handful of boolits and add as needed. Any more than a thin film in the frying pan is too much. The boolits need to heat for a short time so the lube flows thinly all over them.

    It is quick and easy and you can load immediately after. I pick out coated boolits with needle nose pliers and stand them on foil... or lay them in the case of .30 cal.

    It works for me.

    Longbow

  7. #7
    Boolit Master

    stubshaft's Avatar
    Join Date
    Apr 2009
    Location
    Southernmost State of the Union
    Posts
    4,265
    Even if you could cut new grooves into the body that long boat tail would make a mess in a lubrisizer.
    If God didn't want man to eat animals, he wouldn't have made them out of MEAT!

    The last thing I want to do is hurt you. But it's still on my list.

  8. #8
    Boolit Master
    Join Date
    Jan 2010
    Location
    Tom, VA
    Posts
    4,663
    You should consider trying 45-45-10, which you can formulate yourself, or purchase by the quart from one of our respected vendors. It is exceptionally easy to apply, and works well. It is also inexpensive.

  9. #9
    Boolit Buddy
    Join Date
    Jul 2006
    Posts
    302
    All good ideas. Thanks.
    So many toys........so little time.

  10. #10
    Boolit Master

    gwpercle's Avatar
    Join Date
    Sep 2011
    Location
    Baton Rouge, Louisiana
    Posts
    4,974
    Quote Originally Posted by M-Tecs View Post
    Nope cutting the mold won't do it. You would have to add material to the mold to make that happen.
    Exactly right ,
    When you are dealing with moulds you have to sort of think backwards and in reverse ...removing metal makes the groove shallower, adding metal to the grooves will make them deeper .
    With the price of double cavity Lee moulds being $22.00 -$25.00 (Midway) you will be ahead just buying a new mould in the form you want . The Lyman 450 lube sizer I bought in 1971 was the best piece of loading equiptment I ever bought. Conventional lubed and sized boolits in a lube/sizer are still the fastest easiest way to do it .
    Gary
    Certified Cajun
    Proud Member of The Basket of Deplorables

  11. #11
    Boolit Buddy
    Join Date
    Jul 2006
    Posts
    302
    Quote Originally Posted by gwpercle View Post
    Exactly right ,
    When you are dealing with moulds you have to sort of think backwards and in reverse ...removing metal makes the groove shallower, adding metal to the grooves will make them deeper .
    With the price of double cavity Lee moulds being $22.00 -$25.00 (Midway) you will be ahead just buying a new mould in the form you want . The Lyman 450 lube sizer I bought in 1971 was the best piece of loading equiptment I ever bought. Conventional lubed and sized boolits in a lube/sizer are still the fastest easiest way to do it .
    Gary
    I have 2 450's. One for BP lube and the other heated for hard lube.
    So many toys........so little time.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check