RepackboxInline FabricationRotoMetals2Lee Precision
WidenersADvertise hereTitan Reloading

Page 2 of 2 FirstFirst 12
Results 21 to 29 of 29

Thread: First elk! with cast LEE 320 50 cal

  1. #21
    Boolit Master
    Join Date
    May 2006
    I used to shoot deer with 50 cal roundballs and had great luck close up. Recovered one one time, it looked like a pancake. It was a swaged speer .490, and was, I guess, pure lead. seems like the REAL would have expanded a little at least.

  2. #22
    Boolit Master brewer12345's Avatar
    Join Date
    Sep 2017
    Denver Metro Area
    I cast all my round balls and conicals from SOWW. Plenty soft. The .530 round ball I used this fall must have been pretty soft because the entrance wound even showed expansion on the doe. REALs shoot well for me provided I use an over powder wad.
    "If you see me running something has gone poorly, and you should probably run too." - any beekeeper

  3. #23
    Boolit Master

    SSGOldfart's Avatar
    Join Date
    Sep 2011
    East Texas
    Congrats on a job well done, what state are you hunting?
    I started out with nothing and I still have most of it left.
    Paralyzed Veterans of America

    Looking for a Hensly &Gibbs #258 any thing from a two cavity to a 10cavity

  4. #24
    Boolit Mold
    Join Date
    Mar 2018
    In my new home state of New Mexico, down in the Gila area.

    I think the condolences are appropriate, but for my wife. She is tired of hearing about elk and elk hunting and the application period is open so here we go again!!

    I didn't experiment with any other cards or loadings as I was well within a "minute of elk" with the range I am comfortable with open sights. If I had mounted a scope I would have tried harder for better groups. Pretty easy to hit elk if you hunt up inside 30 yards!

    If I draw primitive MZ deer this year I may start shooting round balls and try for maybe 150yard ranges, I bought the Lee combo mold but haven't shot them yet.

    Thanks for all the congrats, it's a long way from NC where I was raised and I bit different from tree stand hunting whitetails I'll say that!

  5. #25
    Those REALs work well in 1:28 twist too

    Got a load that is gold in an inline of mine with a lubed durofelt wad under it, 95 grains of RS select...1-1.5 inches at 50...

    I have heard alot of mixed reviews on the REAL boolits but I've never had an issue... plumbing lead and the felt wad seem to be the ticket

    Sent from my moto g(7) power using Tapatalk

  6. #26
    Boolit Grand Master

    missionary5155's Avatar
    Join Date
    Feb 2007
    Back in Sunny, Warm Arequipa till 2020
    Good morning and Congratulations !
    There sure is a grand heart thump using a muzzle loader ! Hard to imagine SOWW not expanding much on a big heavy body.
    Mike in LLama Land
    "Come unto Me, all you who labor and are heavy burdened, and I will give you rest." Matthew 11:28
    Male Guanaco out in dry lakebed at 10,800 feet south of Arequipa.

  7. #27
    Boolit Mold
    Join Date
    Mar 2018
    Well it was a double lung shot, not much resistance there I guess, very close and at 1500fps I went through one rib and clean out the other side.

    I'm not complaining man it got the job done in a few seconds. 10 of 10 would shoot exactly the same again

  8. #28
    Boolit Master taco650's Avatar
    Join Date
    Jan 2013
    OR->LaGrange GA
    Congrats on a successful hunt with your muzzleloader! One suggestion... don't water drop the bullets because it does harden them. Instead, fold up an old towel or cotton shirt and lay it in the bottom of a small cardboard box and drop them into it. That way they can air cool and will stay a little softer. Might make them easier to load.

  9. #29
    Boolit Master

    TCLouis's Avatar
    Join Date
    Mar 2005
    Middle TN
    Relive the hunt with many meals in the future!
    Nothing is impossible for the person that does not have to do it.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check