I just purchased a Saeco #081, .323/8mm Caliber, 190 Grain, any help would be appreciated. I have been using 18 grain's of 2400 in my 7.62x54, 303 brit's with very good results. what do you think about 18 grains in any of these 8 mm's?
I just purchased a Saeco #081, .323/8mm Caliber, 190 Grain, any help would be appreciated. I have been using 18 grain's of 2400 in my 7.62x54, 303 brit's with very good results. what do you think about 18 grains in any of these 8 mm's?
Years back there was a group buy mould for a 190 gr 8mm bullet which I got. It casts an excellent bullet for the 8x57. I had a bunch of Turk pull down cases so I loaded the 190 gr cast bullet s (sized .325 and lubed with javelina) over 31 gr IMR4895 with a Dacron filler. I also was making my own GCs at the time and ran a simple comparison test out of my VZ 24/47 with a Leupold 6X scope on it. Given the old late '30s Turk cases with Berdan primers they did well. Your bullet should do well also. If the 2400 doesn't work out try 28 - 31 gr 4895 with the Dacron filler.
Attachment 253973
Larry Gibson
“Deficient observation is merely a form of ignorance and responsible for the many morbid notions and foolish ideas prevailing.”
― Nikola Tesla
I'd slug the barrels, think the 8mm Lebel barrel was spec'd larger than the 8x57, similar to the 8x56 M95 .329 ish?
Charter Member #148
I have had good luck with 2400 in my Mauser 8mm's
I think the load was around 17 grains but it was no where near the max.
My loading data is packed away from a move , or I could be more specific.
Thanks guys I appreciate all of your help.
I used 5744 with that bullet.I don't have the load data handy at the moment.I loaded the ammo up to function fire an M88 Commission rifle and some
Numrich en bloc clips I was reworking.The clips were unusable as received.I did get the clips to work.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |